I'm looking for an office laser printer, B&W only that will handle legal sized paper in a cartridge completely enclosed.  I have seen them where when loaded with legal paper the paper sticks out of the front or out of the back.  Because we have a dusty environment, I would like ...

Hi (again), my trusty HP laserjet IIIP is having 'issues' with the paper
pickup from the auxilary A4 tray.
When used from the self loading tray (in-built) it seems to be 100% okay
with fresh paper - sometimes grabs two sheets if second side or curled

I can't find any setting in Epson R320's 'PrintCD' program to correct
a slight mis-alignment of the printed label.  The printed image is
offset vertically about 1/8".
Anyone have this problem and know how to fix it?

Anyone still make a plain old generic use printer to connect to a parallel port?  Last good long-term printer I had was a Canon BJC-5100.  Refilled the ink cartridges and used it for years until the mechanical parts started failing.
Also, this one printed on 11x17 paper which is ...

Gidday Folks,
Our little workgroup has a laserjet 3000DN connected to the router via
ethernet. Jobs sent to the printer from any of the computers seem to
be jamming the print que. You can try deleting the job but it doesnt

Hello, And thanks for reading.
I work for a community outreach center. Naturally we are underfunded
and we have obsolete technology. We have computers available for
people to use with printers, but the printer had stopped working

What would be a good printer for 4X6 inch photos and for printing on
inkjettable DVDs? I don't have much need for other sizes.
I might be doing a hundred DVDs and 25 prints a month.
I can refill or install a CIS if available.

i need a Ploter Printer with new dimensions and print out. color hp
ploter, the latest brand from hp

I have an HP6980 that uses the 97 color cartridge.  I have refilled it
only two times and now I get an "blinking light" error and printer
will not print.  I have done a hard, soft reset, system reboot to no
avail.  Printer prints OK with only the black cartridge (96).

I am using Canon Pixma ip6000D to print pictures.
The only problem with the printer is the prints are all bluish tinted.
Could someone advise me how to correct bluish tinting?
Jorge

I have had this printer for a few years and it has never really worked
properly
Sometimes it manages to print properly and with proper colours but
consistency NEVER lasts, with the ink carts often drying out if left

After not using it for a couple months, I tried printing and the black
(#15 cartridge) is not giving me anything at all. The software tool
says its at 90% which is probably about right. The color is working
fine. I also have an old black cartrige which I swapped in - also did

I need a new HP97 color cartridge and considering a remanufactured one
rather than a brand new one.  What has been the experience with these
vs new ones?
Whatever I get, I would refill it myself as needed.

I've never tried tis and am wondering if there are any gotcha's.

Please note that on or around July 15, 2009, AT&T will no longer be
offering access to the Usenet netnews service.  If you wish to continue
reading Usenet newsgroups, access is available through third-party
vendors.