Need a fax machine for (very) light duty faxing.  My flat bed scanner and my
printer are both old enough to replace.  All of my devices (printer,
scanner, fax) will see light duty but I still want very GOOD quality,
especially printing.  Just don't have the room for a stand alone ...

I noticed for the first time when buying a new cartridge for my HP
photosmart printer C7180 that Calidad cartridges were available for it.
Anyone used these? the manual stresses not to use any other inks as this may
damage the printer.  Is this true?  The cost was round half the ...

Hi group,
I know this might seem a self-evident problem :\ I bought a HP Color
LaserJet CP1518ni brand new a few months ago. The first time I tried
to use it was about a month after buying it. It took forever to print

I've been playing around some CIS systems for my Epson Stylus R1800 to
see if I can lower the cost of printing with this amazing printer.
The problem is that I print a lot of glossy brochures for our business
and the printer uses up so much ink that it's impossible to keep up

I have a Samsung SCX-4725FN printer.  The toner cartridge has a chip
that limits how many sheets can be printer with a cartridge.  Does
anyone know how to reset that chip when the counter limit is reached
but there is still toner in the cartridge?  Is there a way to override

My old one is dead (rip). my unit is a: " Int - w  200 unit". where can
I buy a compatible printer?
The high-techoffice do not have any in stock.
Yvon

A friend has an HP Designjet 130 he'd like to get repaired. He says that a
sensor appears to have gone bad. The official HP repair facility wants to
make an on-site repair but advised that the cost would be prohibitive,
suggesting that he simply replace the printer. Considering ...

I've read about some old inks developing problems, but never
experienced it until today.  Sometimes, with old color inks, I pour it
thru a coffee filter before using -- to filter out any organic
growth.  Today, I went to refill an old HP 500 AIO with ink I've

Finnaly I got a canon ip4600, but there's no way to get the normal paper
tray to catch any paper.
The pictures on the manual don't show the real size of tray versus D4 paper.
And there is no limit of how deep is to squeeze the tray in.

I want to buy a printer with automatic double side printing.
First I saw laser color printers but the cheapest with duplex was around 350
euros. Then I go for inkjet, the only I found was Canon Ip4600 but I'd read
that when print double side pages the black is not black, is gray.  ...

[Please keep soc.culture.indian in the groups line. I'll have to access
the replies there.]
Severe newbie here, all help appreciated. I have a Brother HL-5250DN
laser printer and the original toner cartridge seems to have run out

Ran out of ink. When I lift access door to change cartraige the cartraiges
will not come out to location to remove. Any ideas. Warren

we are selling all kinds of  clothing , shoes , caps  jewelry,
sunglass and watch in low price(paypal payment)
If you are interested in our products, please contact directly with
us. our website: www.fashion009.com

My R 300 doesn't push a drop of black ink out onto paper, with an
existing cartridge that's half full, nor with a brand new install. If
it's a clog, it's total, so I suspect something solid is blocking the
flow, but have no idea how to troubleshoot or repair.

I have a problem on printing on Zebra TLP-2844-Z.
The whole-sticker is combined of several little-stickers.
At the buttom the sticker can be cut off (about 1 cm from bottom).
When I print via crystal report (on VB.NET 2005), I cannot reach the bottom