My faithful Epson 880 black text has gone feathery.
The cleaning cycle print shows black mis-alignment
Repeated clean, align cycles dont help.New cartridge doesnt help.
Has any come across this problem and is there anything I can do to the

anybody have W98SE drivers for a Lexmark X1240??
G-D Microsoft WITHDREW them June of last year,and the box said it had
W98SE support,but inside was a errata sheet saying W98/ME support was
not available after June 30,2007.

A second printer of mine, the Epson r1800, I'm going to get A CIS/CFS
system.
Currently the cartridges in my printer are nearly full?
To switch off to this new external resevoir, do I just remove all the ink

I need to print text in a very small font size (0.25).  This text will be
readable only with a high-power optical magnifier.  I tested some of the
low-cost inkjet printers, yet none of them have the required resolution.  Is
there an inkjet printer good enough for such a task?  ...

I received the chip resetter for Canon chipped cartridges yesterday from
Germany.  It included 5 inks and a different syringe and needle for each of
the colors.  I was impressed that the needles were included too and it was
well packaged.  It also had a small screw type minature ...

I've been trying to set my printer profile as default, but can't
I have a profile that suits with paper type (plain paper), media
source (cassette) etc, but I want to set 'preview before printing' to
ON but when I check my main preferences window again it is back to OFF

I have an Epson c88. When printing from and XP-home machine, I get the
Epson Status Monitor popping up with the Epson Status Window and a
"Communication Error" displayed... check your connections, blah, blah,
blah. The printing always completes normally - but it always displays

I have a HP2600n laser printer, which I use to write my letters and
other documents.
In spite of all my efforts, some of the really basic colors (the most
standard <red> for example) look "diluted" after printing, although

How do I install only the drivers (not the software) for the PSC 1210?
I have the disk but I think something's not working right.
I tried adding it going through the printer wizard and using the "have
disk" option but it said, "the specified location does not contain

I have a Gateway computer with the following: 1) a 1400-MHz Pentium 4
processor, 2) 256 MB of RAM, and 3) 40 GB of hard-drive space.
The computer is running Windows Millennium Edition (ME).
Two and a half weeks ago, I bought a Brother MFC-240C printer. This is

I ordered and just receieved a fully charged CFS system for my epson
printer.
They're closed now so i cant call, but the cartridges with the tubing
attached is separate from the Ink bottles.

The price of ink cartridges and how quickly they go through ink is
outrageous.
So I went ahead and purchased refillable ink cartridges from ebay for
my epson cx8400. I paid about $20 including shipping for 4 pre-filled

I have my ol' trsuty epson 880 inkjet
I use the typical generic ink replacement cartridges but sometimes the
prints dont match the output of the print.
Where do I make the adjustments to tweak the color ? in the printer driver

I have 2 printers - a Xerox laser with an old W2k machine on the network
as a print server, and an AllInOne HP 1210 connected via one of the
desktop main machines.
I have one XP laptop that prints fine no matter where I point it.

Here's the link that will last for another week....
http://cgi.ebay.com/NEW-Canon-Ink-Chip-RESETTER-reset-ALL-CGI-8-PGI-5_W0QQitemZ3
20265847358QQcmdZViewItem?hash=item320265847358&_trkparms=72%3A552%7C39%3A1%7C65
%3A12&_trksid=p3286.c0.m14
Here's the ebay keyword  "NEW Canon Ink ...