I'm not sure if someone here can help me... but here is my problem.
One of my clients has a Canon ImageRunner 2230 laser printer/copier/
scanner/fax... it's a big unit they lease from Canon. This machine is
connected to the network and receives print jobs via that.

I need to replace my Epson Stylus Photo 825 as one of the print
nozzles is permanently clogged!  I have been looking at both HP and
Canon printers, more specifically HP 7550 & Canon Pixma ip6700.  Has
anyone had any experience with either printer, good or bad?

Can anyone tell me the steps involved in scanning slides using the
Epson CX6400 all-in-one printed. I've tried the Smart Panel option,
but there's no pop-up for slides given. Any advice on how to use the
scanner to scan slides would be appreciated.

Plz tell me what program to assemble a designed file using PCL 5.0?
For PCL 6.0 I am using JETASM and the PCL 6.0 designed file should be
written in a plain text format. The commands in PCL 6.0 are totally
different from the commands listed in the PCL 5.0 manual. For

Hi out there...
I have a PhotoSmart 2610 and need to replace the mylar cable just behind the
ink cartridge holders.  I need to get the top unit off... the cover with
scanner/etc off in order to reach some of the screws holding the flat plate

Just got a new HP LaserJet 1022. I had intended to use the economode
as default (which certainly seems fine for general use) and only turn
it off for the occasional important letter. But the manual says darkly
that this is 'not recommended'. Anybody know why not? Is it only to

I've used Hobbicolors for a few years now and have been satisfied with
their products and service.   Has  anyone had experience with both
Hobbicolors and MIS bulk inks.
I'd be most interested in your opinions.

I'm trying to configure a Macbook Pro to use a Lanier MP C4500/
LD445c.
I've downloaded the Mac drivers from Lanier's site for this printer,
but the readme included with them doesn't jive with the actual printer

When printing to this LaserJet 4si printer, the default output bin is
specified as the upper output bin, but the hardcopies end up spitting
through the back of the printer instead. Is there any way to change
this? Thanks.

I live in the UK. I'm using a lexmark x7170 currently. For the fax
it's on its own dedicated line, but these days with so few faxes it
seems a waste and I wanted to connect it to the main office line. I
rang up lexmark and they said that if i bought a filter/splitter(?)

I need to install a PostScript driver on my PC for an HP 1022 printer.
This printer supports PostScript. I cannot find a driver for it
though. Is there some generic driver that I can use, or does it have
to be specific to this printer?

Sometimes the sheet being fed develops an irregular crease around the
middle. This is happening before the fuser because in the worst cases it
leaves unfused toner around the crease. It seems to happen whether or not I
am using the duplexer. Any suggestions as to what I should ...

I just bought an HP Photosmart C6180 all-in-one to hook up to my debian box.
Anyone else seen this effect, printing from CF card onto glossy photo paper?
http://www.infomax.co.uk/hp/Calibrate-PhotoPaper.jpg
(That's a 300 dpi scan of the result)

I've got an Epson CX3200 which seems to have a blocked nozzle.  No
colours except blue are printing, despite several cycles of nozzle
cleaning, 'cartridge changing', and (out of desperation) head alignment.
I took out the cartridges and put a cloth covered in alcohol in their

We're getting rid of our IP based/Ethernet connected printer, in favor
of something like the DesignJet 90. The specs list this printer as USB
or parallel....no Ethernet. So, will others be able to access it (i.e. 1
computer that is connected to it acts as a print server for ...