Got a problem with an HP 2300n.
Error code is 13.20.00.  Remove tray 2 and open/close top cover.  This
happens every time at switch on.  Printing is not possible
This appears during the self test so can't run any of the diags from the

Measekite has claimed ad nauseum that many, if not most, of the posters
to this newsgroup that have reported printer troubles are reporting that
the troubles are traced to the use of non-OEM ink, "generic" in his
terminology. I disagree, as do several others who regularly post ...

Dear Shooter,
In the first box I chose Install and the next box I was told that there was
just 191 MB of space, way from the 800 MB needed by Lexmark's files.
So there was no option "Custom" or on which drive to install the files.

I have an HP Designjet 120 and would like the print to be more durable.
Even with original inks the print fade very rapidly. Once i made a
printout that looked fine, but on the way to mu costumer the print faded
so much that the costumer was dissatisfied. The trip took only 45 ...

I've been experimenting with an old HP Laserjet 4 Plus. It's a great
printer except that it's fairly noisey. I don't mind the noise while
it's actually printing, but even when it's in powersave mode, the fan
still runs. Does anyone know if there's an option or firmware upgrade

If ANSI (the American National Standards Institute) enters the foray on
any of these issues regarding ink quality, longevity, etc. etc., I
might lend them some degree of credibility. In the meantime, if any
publisher, agency, institute or anyone else who is in any way

We bought a HP Photosmart 7700 awhile back from Costco, and were in the
process of moving, so we didn't take it out of the box for a little over
year to set it up.
Then it printed a few things nicely and failed, saying that one or more

I went into Office Max to get my ream of paper for a Lexmark 88 cartridge
and found you now have to buy something to get the "free" paper.  At least
they still have the offer: Office Depot and Staples only allow you $3
against the overpriced cartridges they sell.  

I have a question that I hope someone here can answer.  I have an older
postscript printer.  It will be replaced soon, but I want to try to get
to the bottom of why it prints jagged angled lines, but when I create a
bitmap of the same angled line and print that, the printer displays ...

In PCL 5  Printer Language Technical Reference Manual Part 1 Page 15-13
the Raster Width Command
Ec*r#S
#= width in pixels of the specified resolution

i get the PCL raw file from the HP 2500C Series PCL5Ce,use print to
file
i coach tried to analyse the file.
when i analyse the command about Raster Graphics,i find someting very

See :
http://www.hp.com/hpinfo/newsroom/press/2006/060926xa.html
HP say they are now shipping the new HP Photosmart Pro B9180. Can anyone
confirm this and does it include Europe?

Since the HP CP series print heads get replaced when buying a new set
of inks/heads, I figure the worst that can happen is I clog the heads.
I'm going ahead and refilling the dye ink cartridges, using Encad GA
dye ink. It was made for a slightly different HP print head, since that

Spent a flipping evening trying to resolve a incorrect colour problem
on my ip5000.
Yes, yes yes I changed the Magenta OEM tank, but the red's came out a
browny red, all the other colours was more or less ok, so in went a

I am trying to get this set up on my system.  I have it linked to a desktop
PC and, wirelessly, to a laptop in another room.  I have loaded the Auto
Sheet Feeder with envelopes, and the Cassette with A4 paper.  Now if I want
to print a letter and then an envelope on the desktop, ...