I discovered that printing settings for my HP 890C in Windows 2000 built-in
drivers are less detailled than original HP drivers for Windows NT4 or 98.
Does anyone know about alternative drivers for Windows 2000 ?
/jr

I've got an HP 2550L colour laser, running via a printserver.
It prints single colour pages perfectly. But if I send, say, a three or
four page Word document or a PDF with colour pics, it prints the first
page or two then prints only a bit of the next page before bombing out.

after several relocations I've lost the manual for my HP LaserJet 4P.
HP does not offer a download.
Does anyone know another download source?
Or does someone have the PDF file?

probably already solved by someone...
Canon tells me to send the printer for a repair, because the waste ink tank
is full.....
There must be a way to do this more intelligent?

We have a couple of LJ 5 printers which frequently jam paper.  Which parts
should be considered replaced or is this normally an expensive
repair/replace process which should not be considered...?
regards

Does anyone have IBM Infoprint 21 Service Guide (G544-5702-00)?
I've got an IBM Infoprint 21 (4322) printer, which reports
"454 FUSER ERROR" on its LCD, and refuses to print. The printer
is almost 5 years old, but it was used very lightly (on the

I have two Canon units (i9950 and iP8500) both are experiencing identical
issues, which really makes me wonder (am I correct in thinking that the
basic driver for both models is identical?). I have two boxes here - one
running Windows XP, the other OS X Tiger and the issues are ...

Has anyone found  a paper in the uk that they don't have to change profiles
for?  I am using fuji film multijet glossy 270gsm ***** (thats 5 stars)
i hate kodak ultima.  I have also tried jessops own glossy stuff.  Was ok
stuff with canon.

I wanted to give a solution to this problem, which, as far as I can
tell, currently appears nowhere on HP's website (troubleshooting or FAQ
sections). I had to call HP tech support, and just barely escaped the
39.95 fee for this info. I had to wait on hold ages for a supervisor,

I just purchased an HP 6540.  My main attraction was its ability to
print borderless and it's inexpensive cost at Costco.
I am trying to print some brochures at 8.5 x 11.  I created the
brochures in Powerpoint 2003.  In PP, the page size is set at 8.5 x

Yep, still banging away on this old box.....
Anyone have an idea on how to clear the "User intervention
required" error without having to re-boot and re-connect the
dang thing?  Clearing it on the print queue won't do it.

Out of curiosity, what is the thin strip of plastic/film that is about 1/4
in by 12 in that runs through the ink cartridge carrier? This is for a  HP
PhotoSmart printer. TIA

I am an old hand at refilling inkjet cartridges.  However, I am in
need of some information as I have no exprience with HP printers and
am getting conflicting information from postings and sales personnel.
I am considering replacing my current printer with the HP 6540 and I

Does anyone know how to switch a Hewlett Packard Laserjet 4M into hex mode ?
Thanks in advance to anyone who can help.
Mark.

There have been more than a few reports on this NG that Canon has not
been forthcoming WRT their recent inkjet printer rebate offers.  It's
only fair to report a success.  I bought an iP4000 back in early June
because it offered both a store discount and the rebate.  Just ...