Outlook got rid of the original thread I posted about my
motherboard.
Damn it.
I only really want to boost the vcore by a little bit,

I'm sure this question has been asked before.
I want to up my vcore setting, but I cant seem to find it
in the BIOS, can any1 help me?
Ty much

It will be interesting to see some test results
http://www.danamics.com/danamics-lm10.aspx
peter

I looked into the Bios and saw there was a multiplier - but it was
already set at 5X and doesn't go any higher - I looked around and
couldn't find anything else that had a multiplier so I can overclock.
The motherboard is a Asus M2N-E - but the bios hasn't been flashed

I am going to build my son another pc using all his old bit. I also need to
use his AGP card.
I have chosen to go with,
Asrock 4CoreDual-SATA2 R2.0

E8400 multiplier = 9x       USD179.99 @ newegg (7/21/08)
E8500 multiplier = 9.5x    USD199.99 @ newegg (7/21/08)
Which one is possible to overclock higher using ASUS P5Q-E?
Thanks

Hello, I'm not sure if this is the right forum, but if it's not, maybe
you can point me in the right direction.
I'm trying to replace the cooler on my old Medion P4 2.53ghz system with
a quieter one.

But I'm asking anyway. How are dual and quad core CPU's
on Overclocking.
And does Intel overclock better, or AMD?
My Pentium 4 went a good and easy 500MHz before I even needed

Time-Warner is dropping all newsgroups.  Verizon is keeping most of
the Big-8 but is dropping the entire alt.* hierarchy, which includes this
group.
Keep this in mind for future posts, and you may wish to migrate any

I've got an 8RDA+ system that was running fine early today. (It is not
overclocked, but I'm thinking overclockers may have some insights too,
hence the cross post.)
It was left on while people left the room.  When they came back a few

What's a good CPU fan/cooler that isn't hugely tall, so it will fit in
a midsize tower case. Looks like I have about 6 inches of headroom to
put this thing in. Like to replace my stock cooler for my e8400 to try
out some overclocking. Don't want to spend an arm and a leg. So, what

i have a q6700 im trying to put into a 680i board (striker extreme)
is something suppose to snap in? from what im seeing its spose to jus
lay in there, then you close the cap and lock it down
i lay it in there (gold arrow in the correct spot) and the cap doesn

I posted this on another group, with people acting like they are so smart...
I never got an answer.
I'm going to answer my own questions though, so please give me a little
while to post a reply to my own message...

Anyone here know where I may find a quad 604 pin Xeon board?
Because as far as I know, you only need 2 cpu's to get it working.
Then I could just get my fingers on 2 more cpu's later.
BTW 533 MHz bus. 133 FSB (Yeah, right!?) More like 132.5?