I've heard this is possible - major doubt is: will it affect stability?
Based on the fact that new Penryn 45nm CPUs will start to have
reasonable pricing around the end of the year (or, though, not before
this summer) for the meantime I've decided to go for a cheap CPU with

I tried an OC which resulted in my DRAM at 463Mhz, which was not
stable
http://i32.tinypic.com/346mgdl.jpg
So now I am at 375Mhz

According to the latest version of Speedfan, the temp of my Q6600 (G0) is
around 21C and goes up to 25C under load. I'm not sure if the temp is
accurate. Isn't it too low?
I installed the same version on my 2nd PC which has an E6400 and Speedfan

What is the best way to overclock this machine?

Playing with the little 1.6g until tomorrow, but noticing that EasyTune
does a right fine job of varying the cpu fan speed per the "cpu" temp which
is Winbond IT8718F temp2 per spedfan 4.33final.  cputemp/casetemp is 56C
per "coretemp 0.96" (Freezer7).  I do wish I could vary it per ...

I have a small overclock (300mhz) on my Intel Core 2 E6300 machine.
Should I use Gigabytes equivalent to speedstep?

I have the folloving setup:
-Asus Striker Extreme 680i SLI(Rev A2) BIOS 1401(latest)
-Intel Q6600 2.4GHz stepping B3(i think that the stepping is important for
subject)

I have an AMD 64 LE-1620 2.4GHz Processor, and it's my first time
messing around with over clocking. I played around with the FSB and
voltage a little bit, and was able to get my system to stay stable at
3.01GHz using a FSB of 250x12, and 1.375 volts. The problem is that

looking for Apogee Overclocking utility Version : 1.51 (or later)
i've looking for the last week, and the sites that are supposedly there
aren't.
anyone?

I've been lost for a while and have not been albe to keep up with
trends. My computer has been rebooting for no reason lately, I think
it's the m/b or Windows trying to con people into upgrading to Vista.
I"m considering just buying a NEW DELL for around $800, but I think

Does overclocking a slower CPU result in higher temps than the speed
equivalent for a non-overclocked faster CPU?

I'm missing one detail about Thermaltake Sonic Tower installation:
My motherboard (LGA775) has four holes around the processor for putting the
screws in them but they are too wide for Sonic Tower's screws and they do
not have threads.

   I am looking to overclock my laptop which has a Pentium-M "Dothan" core
as the CPU.  I spoke with another individual who performed the overclocking
mod on exactly the same model of laptop that I have.  He talked about the
CPU overheating a lot because the heatsink was ...

Is there a web site showing how to quickly estimate power supply wattage
needed?
I want to build a quad core Q6600 based PC overclocked to about 3GHz, with 3
x 500G or larger sata hard drives, some P35 based motherboard, and a cheap

Hey does anyone have one of these yet? I'm interested in how they perform
and how good they are for over clocking, cos if they're any good I wouldn't
mind using them in a couple of low budget pc's. So far I can't find any
benchmarks...