I saw a boxed gigabyte GA 965P-S3 motherboard at a local computer store.
I looked all over the box but could not see what revision it is. I am not
allowed to open it, of course.
Does that mean it is rev 1? Or are there other clues I should be looking at?

Hey People,
been out of the loop for a little while, sooo looking for a heads up on what
motherboard /cpu  (AMD of course)combo's are hot for oc'ing.
Any help greatly apprecited

i need to change the RAM memory for my old Acer aspire 1360 and I was
told to go for one of the 2 listed below:
Samsung 1 GB DDR SODIMM PC2100 1GB 266Mhz 1 GB G GO NEW
1GB DDR SODIMM MEMORY FOR ACER LAPTOPS

I just set up my new system and it runs fine at default but I can't
seem to overclock it without problems. Here's a brief description of
the system.
GA-M55Plus-S3g (rev1)

I'm considering switching to a core 2 due cpu after years of just AMD
machines (only upto S939 DDR and not DDR2 machines).
However coming from such a background I'm finding I'm getting confused
about the multipliers/FSB etc. and it seems a number of sites seem to

A8V DeLuxe Bios Settings (AMD4800+)
SiSoft Sandra Processor Performance Rating: PR5009 (estimated)
Advanced
----------

I want my old machine to last 1 more year before bying a Quadcore.
I have a Intel Pentium 4 Northwood 265 GHz.
Motherboard is Micro-Star International
Model: MS-6701

I've got a computer with onboard video.  I need a little faster video
response to play Flight Simulator 2004 with the better quality video
settings.  I have a large LCD monitor and want to use it at its native
resolution of 1400 X 1050.  Would also like to use our LCD HDTV with a ...

It takes me much longer to cumm than if I used AMD !!

How can I buy a mobo with the latest revision?
Many people at newegg complain they are getting older revisions of a
motherboard.

I'm currently running an Athlon 4200 X2 o/c'ed to 2.6ghz.  No voltage
change from stock.
I would like to get as much out of the system to extend its life as much
as possible.  I just upgraded my wife's computer with an Opteron 170

I have a C2D E6400 Cpu on a Gigabyte 945P-S3 Mobo
My Ram is
Module 1    DDR2, PC2-5300 (333 MHz), 512 MBytes, Corsair
Module 2    DDR2, PC2-5300 (333 MHz), 1024 MBytes, GeeSkill (I think)

I have an intel E4300 on asus P5PE-VM with some DDR 500 memory (PC4000) in
single channel mode.
When at default bus speed 200Mhz, sisoft sandra memory bandwidth test
reports bandwidth of 2918 MB/s

I am looking to build a new machine on a low tight budget and so cannot
consider either of the new cpu's from intel & amd i.e the core 2 and the x2
respectively. Using the cpu charts on toms hardware guide I can see that the
pentium d 820 is by far the best choice in terms of the ...

I am currentl bidding on this used cpu on ebay.  I have a new biostar MB to
put it in.  How is this cpu?  Can it be overclocked?
Thanks,
Brian in MI