I am working on a specific project that involves a lot of number crunching.
I am looking to build one or more machines to cope with the problem.
I am looking at using a pentium 850 D and overclocking it to get greater
perfomance. As I don't intend the machiens for permenent use I am ...

I am new to the overclocking world but i have just built a new pc for gaming
and would like to push it a little. I have a Athlon64 3500+ AM2 w/ stock fan
installed in a Biostar TForce 6100 AM2 motherboard with 512MB of PC6400
Mushkin Enhanced memory  (green) and for now running ...

What is the difference between :ADA3700CFBOX and ADA3700BNBOX?Thanks.

I have an AMD barton 3200+ CPU
core 2191.5 multiplier x 11 fsb 199.2 bus 398.5
Motherboard is a Gygabyte GA7N400PRO2
I have a gygabyte program called ET4 (easytune) which will make setting

iv just got an ol computer, which was second hand,
iv recently learned that you can get different speed pci/agp slot
thingys
anyway, does this mean i cant

I want a cheapish upgrade for my PC.  I have a single Kingston Value 512 MB
Dimm and want to know how much of a match must i have to be able to use dual
channel access.
would another kingston dimm of the same spec do it or do i need a matched

Just a few days after I had upgraded to 1101, I just noticed on teh Asus FTP
server that there is a new BIOS 1201.
ftp://dlsvr02.asus.com/pub/ASUS/mb/socket775/P5W%20DH%20Deluxe/
I am just about to try it.  Hopefully it will give the ability to unlock

Thanks in advance for any answers to my question. I have the Gigabyte
board in the subject, with a Pentium D 805 CPU. Got them both as a
package for cheap.
Now I see that people are overclocking the D 805 so I wanted to try

Hey all,
Upgradde time. as wondering if you huys could give me an idead what my used
stuff might be worth.Thanks
1)A64 2800+ Clawhammer Socket 754

   I have a PC Chips MB with a 600mhz CPU all of which is 5-6 years old.
Was wondering if anyone tried  loading windows XP on one of these?  Were you
successful.
   I did try but the computer hangs especially when I connect to the

i have a Gigabyte Ga-k8n sli mobo which i can get to boot at 260 MHz but
with the memory timings down and the HTT as well.  If i boot into XP and use
Fine Tune 5 i can get the FSB up to 300+ MHz.
Everything is fine until i set it above 279 and then apply the GO button,

Are the coolers the same on these 2?

www.jetway.com.tw/jetway/system/productshow2.asp?id=238&proname=M2GT6%2DPTD
1 mounting hole is in a wrong place ( cannot align with casing's
mounting point ), 2 holes are missing so 2 of casing's mounting points
( 1 can touch or spark with 1 IDE socket's pins below mboard ) can

do the new motherboards with heatpipe cooling on their mosfets chips etc
have to be mounted in any particular way
i.e. does gravity play any part in the way the cooling works...
.I have a lian li case which puts the processor on the bottom..not btx,,

Hello --
See my sig for hardware. One of my Xeons has died, and I'd like to use the
opportunity to make a performance upgrade.
I've seen a lot of 3.2GHz/800Mhz FSB CPUs for sale on eBay, and I know the