Hi; not really an overclocking question but I thought you gut=ys might
be able to help with some insight. I posted overe at alt/hardware also:
Here is what I'm putting together;
Intel D945G MB (dual core, DDR2 dual channel capable)

Or Sas?
So far it would seem, for storage & speed
http://www.newegg.com/Product/Product.asp?Item=N82E16816118035
It's driving me nuts.

i'm looking for a micro-ATX motherboard for a 3D render farm (must be
socket 939, X2 compatible).
The main requirement is that it has to be a good overclocker (i would be
running X2 3800+ chips OC'd to 2.4GHz), and dual-lan (GbE) would be a

 I've got a watercooling setup and my A8N-SLI Premium just went pop.
I'm thinking of ditching it for a DFI board, but from what I've seen the
chipset is underneath the 1st PCI-E slot, and so could be a problem for
a water block (using Asetek).

After some consideration, I am now very interested in the Samsung 940b
model flat-panel display. It's simplistic, and has good 8ns rate. I was
first very interested at the Dell Ultrasharp 1905FP, however, the 20ns
rate put me off because I extensively play Flight Simulator 2004.

I just survived two weeks of AMD64 system-building hell.  I want to report
to you the results in hope of saving some of you other modders from lots of
frustration.
Summary: The Crucial Ballstix 1GB DRAMs do not work as advertised on AMD64

I presently have an Athlon XP-2400+ T-Bred CPU in a now rather oldish Epox
8KHA+
Via KT-266 motherboard. This chip is unlocked and I have been running it at
16X140.8

hey all, my first post here, but everyone around here seems to be real
helpful so i was gonna see if anybody could lend me a hand :)
Well my problem is... i built my own pc, specs are as follows
AMD 3000+ Barton                  

I checked the AMD roadmap, but I did not see any indication when the
processors will change to Socket M. So how much more can we expect to get
out of Socket 939, what do your Crystal Balls tell you? :)
I'm asking because I'd like to do a "cheap" upgrade now and put a better CPU

Trenutno radi na 500/900. Do koliko je pametno klokat sa njenim kulerom?
Optimal test mi izbaci 560/1,3 1280x1024@60hz.
Kloko sam je iz "clock frequency settings" u driver-u.
--

Opinions on these 2 boards...and best ram to run on them.

I know this is OT to some degree, but people here have so much experience
with AMD cpu's that I thought someone might help with this issue.
A client bought an HP/Compaq computer, and I cannot make an eVga/Nvidia 6800
work correctly in it.  The setup:

Well I have built this unit, so far so good. I noticed there is an AUTO
overclock and it mentions using PCI-E also in the bios. Is this OK to use
with AGP card?

Hi, I'm running since some weeks my Centrino notebook (the CPU is a
1,7GHz P-M Dothan) at 1GHz with the voltage of 0,988 hinted for the
600MHz clock for this CPU.
I've simply undeclocked and undervolted it via software with Notebook

Hello friendly computer geniuses!
I bought a really cheap PC running Lindows at a garage sale (was
originally from Walmart).  I wiped out Lindows and installed XP, but it
is way too slow.