I'm researching new 500-Watt Quiet PSU's and need a refresher on the
specific criterion I should be looking for so the new PSU's like both
my motherboards and my (ATX) chassis.  It's been four years since I
lined up parts to hand over to my technician and I apparently didn't

Not sure what NG to use but here goes...
I'm new to Intel having always used AMD but have bought a desktop
replacement notebook which comes with an Intel P4 540 3.2, 1mb L2 cache
(Socket 775) - The mainborad chipset is decribed as 915P + ICH6.....I have a

I'm coming from Intel and this is my first AMD CPU and I  don't know how to overclock ?
For my previous pentium it was easy, only had to increase FSB and  adjust the memory ratio setting.
My memory is OCZ PC3500  433mhz, my MB is Asus SLI premium
There is a lot of settings..... MAX ...

I currently have 2 512 sticks of 333mhz ram was wondering if there is
much point in getting a single 1 gig stick of 400mhz?
Im going to get the corsair memory with the heatsinks if i do get some
and my current sticks are crucial memory i think.

The board is an Asus A8V Deluxe with an A64 3500+ Winchester.
Any ideas why CPU-Z is reporting 157.3 MHz?
Memory
DRAM Type DDR-SDRAM

Will a GF 3 Ti 200 work on an Intel LX mobo.  GF 4 Ti wont even boot but
this might get a bit more play out of my sons elderly P2 333.
640 x480 16 bit is just crawling on an GF2 MX.
TIA

What Is The Best Overclock of Athlon XP2000+ Palomino??The max
frequency???My work max at fsb 280mhz

I'm a newbie and I read about "little wonders" by overclocking the CPU's.
Now I want to try the same. I've got a Barton 2500, bought in March 03 and a
mainboard, where I can change multiplier, FSB and core voltage. I set it now
at 1,8 V core and 18*166 Multiplikator. But there are ...

I have bumped the voltage of my XP 2500+ -M to 1.825v and have it clocked at
195x12.5 which is about 2.4Ghz clock speed running prime temps are hovering
around 60c should I be concerned I mean I expected it be hot with such a
high clock speed and vcore but will it be ok?

Has anyone out there had to dispute a charge with Monarch Computer due
to bad service or defective merchandise?  If so, please let me know.  I
want to hear some experiences.
Either post here or email me at mistermeatball(at)fastmail(dot)fm

received my ys-tech 80mm fan and not sure if i installed it right way round
on heatsink i got it so the label is facing downwards onto heatsink, should
this be facing so i can see it? thinking am i blowing hot air onto heatsink?
Cheers for advice.

Just one month ago I got a new AMD computer (amd64 3000+ (939 socket), MB
Asus A8VE deluxe, 1GB RAM (Kingston), GeForce 6600 - 256 MB) which I loaded
with Windows XP (32bit version) and service pack 2. I think I also installed
the most recent drivers for every component and I run ...

I was in the market for a new video card. A friend told me to get a Radeon
9800XT if i could afford it. He said that these cards overclock nice. My
search on the net led me to many of these cards but the prices range from
$150 - $600. Anyone know how the same card could have such ...

In the spirit of fair and open competition, AMD issued a challenge to Intel to
conduct a head-to-head competition of dual-core x86 server processors. AMD’s
proposed dual-core duel in 2005 would be a live, public performance evaluation
between server platforms based on the ...

i have a very annoyingly noisy TT volcano 9 smart (isnt) HSF.  i need
something quieter.  i did some work for a friend and he gave me a
coolermaster HSF ( no box or ID details) .  its only got a 60mm fan and is
very noisy too.