when I power on my PC with a Abit IC7-max3 and a  P4 3000 nw not
overclocked (and standard cooler), CPU temp raise to 45-50 degree...
Isn't it too high?
If this is not high, what will be the temp if I will make some 3d graphics?

How much faster is a 3000 A64 than a 3000 XP??
Thanks,
Steve

Michael Brown" <see@signature.below> wrote:

I'm currently running an MSI k7n2-v mb, amd 2400+, 512MB 3200 DDR.
considering move to barton 2500+ and OCing a bit.
What are the benenfits, challanges, negatives to going mobile 2500+ over
desktop "straight" model.

well I just oced my athlon xp 2500+ Barton to 2800+ with default voltage
(1.65) and its boots and runs fine, my idle temp with stock cooling is 40C
cpu, 44C diode...the only problem is my generic 512 pc 2700 is holding me
back anyone have ideas of out to set latency on a a7n8x ...

Hopefully this is the best news group to post this query. I have/had
amd athlon 1600+ cpu, chaintech motherboard and 512mb of ram running
windows xp. Friend of mine had a computer that died after a power
surge and wanted to check what bits were dead by component swapping

I have an AMD XP 2000 (A 6-8-0)
Using a nice big Heatsink and ball bearing fan
I'm trying some overclocking, increasing FSB/Memory on a K7S5A PRO
I've seen the CPU get as hot as 49C

  I got a Biostar M7NCD motherboard that says it can support 400Mhz FSB.
I bought a new AMD 3200 XP+, 400FSB CPU and 512MB PC3200 Memory to go with
it. I wanted to run it with FSB speed of 400Mhz.
The default BIOS setup is for 200Mhz FSB and the BIOS menu does not let

I'm looking to replace my stock XP2800+ HSF as it is regularly sitting in
the 60c range when idle and into the 70s under load. I've got 2 extra fans
in my case 1 blowing in at the front and 1 blowing out the back.
I've been looking at the Thermaltake range and pretty much decided on ...

Hiya
Anyway, planning on buying some water cooling stuff:
Asetek WaterChill CPU Cooler Antarctica DYO (1/2" Fittings)
Asetek DYO Chipset cooler - NB01/P2 [1/2" Fittings]

Hi All,
I've been having a problem lately regarding my wired, optical mouse.
Whenever I move it it seems to lag some and then, if I happen to be
listening to music while moving the mouse it starts to stutter.  Here

I've just gotten a DT XP2600+ for a mobo that doesn't support 166FSB (only
100/133) or multi-changing.
Which bridges do I need to cut/connect to increase the default multi from
11.5 to 14 ?

I'm new to A64 systems. I'm just about to put together a system using a A34
3000+ (Newcastle) CPU the stepping is CBAEC 0423SPCW. I just wondered if
this is considered a good stepping and what people are getting out of them.
BTW the Overclockers database is pretty poor for the A64 ...

I am running a MSI K7N2-V mb with AMD 2400+ cpu 512 megs of 3200 DDR RAM.
The cpu is, of course, 133 bus speed.
If I were to move the 2400 to my daughter's machine and get say a 2600+ 166
model, would I get a noticable

Hello all.  I severed some bridges on my cpu, and now have a multiplier of
8.5.  Is selecting a lower multiplier possible on a super locked cpu?  Did a
brief search on the net, and haven't been able to find out if this is
possible.  I thought that if it was super locked, this ...