Hi, how is everybody doing?
At the outset I apologize if I am posting to the wrong group(s) but I was
unable to find a suitable one (maybe someone can help me on this too). Here
is what I wanted to know:

My system:
Asus A7N8X
Athlon 2400+
512mb Kingston PC2100

when I bought my 1 gig dual channel kit of Corsair DDR400, the guy at the
shop thought I should test it in Sandra to make sure thta it is running in
dual channel mode.
At the post screen, I get the message "(Dual Channel Mode Enabled)", but

like in subject:
how much can i get from this ?
my whole hardware:
ABIT NF7 + Athlon 2k+ XP + 256MB PC2100 + 256MB PC3200

Hi all.  This is a followup to my recent post about overclocking a l7vmm3
with a xp athlon cpu.  Thank you all for your help.  However, I've just
realized it's a 5 bit athlon.  Does this make any difference?
Thanks

Does anyone have any reason why my M7NCD mobo is putting my fsb at 200 when
ive got a athlonxp3200? its a 400 fsb board without the 400 fsb option?? i
dont get it lol
Dalgibbard.

building a new machine, asus mobo  starting with a p4 chip that will be
above 3 gigahertz.(3.2 or 3.4)   Goal is looking to get close to 4 but
stable.Which is better for ocing Norwood or Prescott?
TIA

My system was apparently overheating and crashing (although temps shown in
probe were ok) I have fixed this problem with new fans and cpu heatsink.
However, since that i have been getting an error when i boot that looked
like a problem with the pagefile.sys. I have followed advice ...

Hi all.  This is a followup to my recent post about overclocking a l7vmm3
with a xp athlon cpu.  Thank you all for your help.  However, I've just
realized it's a 5 bit athlon.  Does this make any difference?
Thanks

I believe that pseudo-sync is synchronized thus not asynchronized.
However, is pseudo-sync also called 'asynchronous mode'?
i've put some evidence that it is called 'asynchronous mode' at the
end of the post in 2 chunks  each marked <extract>...</extract>

I currently have a Volcano 11 on a Barton 3000, Asus A7N8X mobo, aluminum
case with 2x120mm fans.  I have reset the heat sink twice with AC5.. as an
effort to get temps down  .my temps reach the high 50's under a load.
(Nothing is over clocked).

My athlon has this serial number:
AMD Athlon TM
AXDA2400DKV3C  9574772250426
AIXHB  0321TPAW   c 1999 AMD

Does anyone know, specifically, what the L12 mod actually does?  I have a
theory that it steps up the voltage to the FSB side of the CPU's L2 cache,
to stabilize a default 133MHz FSB for higher frequencies.  It seems to
suggest that Athlon XPs are running at dual voltages but the ...

Hi, how is everybody doing?
At the outset I apologize if I am posting to the wrong group(s) but I was
unable to find a suitable one (maybe someone can help me on this too). Here
is what I wanted to know:

Hi, i have 2 modules of KVR266X64C25/512 (512 MB PC2100 cl2.5).
I have heard about memory overclocking (changing its timings in BIOS).
Do you know if i can overclock my RAM to get better performance, speed?
My mobo is Abit BD7II-RAID with P4 1.70 processor.