I am looking to purchase the amd Palomino 2100 at a reasonable price.
Please email with prices.

Hello all, I have an AMD64 FX-53 and with the stock fan I was average
52c.  I switched to a Tt Venus 12 copper heatsink/fan and see it now
idle around 45c.
I've seen benchmarks of this same CPU with other air cooling systems

Een kennis heeft problemen met internet explorer, als hij deze opstart wordt
die 20 tot 30 maal opgestart. Is dit een virus? En wat kan ik er tegen doen.
Groeten...

Can anyone point me to a good reference spot for O/C my NF7 with XP2600+ and
1.5gig PC3200 DDR?
Thanks

I use a ECS Motherboard model L4VXA2 that supports 533MHz
I currently use a PC3200, ie 400MHz bus memory.
If I put a PC4200, will it work - I understand that PC4200 is a DDR2
technology.

I've gotten hold of a PII 450 MHz and I am wondering if I dare plug it
in my AL440LX motherboard (currently running with a PII 233 MHz). I
understand that the AL440LX only works with a 66 MHz FSB, while the
PII 450 MHz is intended to work with 100 MHz. The question is though,

I have an unlocked 2800+ barton on an NF7S v. 2 , with 500mb dual channel
Kingston stix(3200), I have an NVIDIA GeForce Ti 4200 with AGP8x card, 450
watts of power an ultra fan and heatsink, rated to 3200.  I am running this
with no modifications but would like to do some ...

My Spec is
P4 2.8e 90nm
Abit IS7v1.2
Corsair XMS DDR500 2x512 pair

hi, i have a amd 64 3000+ on a abit kv8-max3 mb
everything works just fine, only my temp is around the 60C (regular procesor
cooler) non active
everything in a thermaltake wingo v7000 gaming tower

Hi all, i'm having a "problem", and want need some advise! :)
I've got an ASUS Mainboard A7N8X-X and an AMD 2200+, ok?
If i overclock the CPU and put the FSB at 166 and the multiplier at 11.5,
the bios report a 1916mhz procesor(or 19xx).

Still trying to successfully raise the FSB from 166 to 200 on an Abit NF7-S
board.
Using a vcore of 1.825 I seem to be very nearly there. However, at the point
of loading XP  it all grinds to a halt with an error message saying that the

I have been an Intel user for year, decided to try AMD. I am looking at the
Nforce3 Asus boards, but am not sure of the processor or ram to use,
especially for overclocking. The board is the KN8-E. Any suggestions for ram
and AMD 64 for overclocking and a CPU cooler also??

I am planning on going ahead and upgrading to 64 bit mb and amd processor.
My last 2 mb have been Asus, and have been very happy with them - my current
is the A7N8X Deluxe V2.0
I do not need nor want onboard video, don't need onboard sound although I

I started up my computer and I got this error message below.  I'm not
sure what to do to fix it, and AI Booster won't load right now.  I've
also got other error messages occasionally that say:
"," is not a valid integer value  or the

Having sent my XP3200 back for a refund (it was a reworked, rebadged XP2500
and subsequently was quietly cooking itself at 1.85v!) I find myself again
on the lookout for a new cpu. Someone mentioned instead of getting an
XP3200, getting an XP-M cpu because they overclocking very ...