I have to replace the graphic board of an old HP Pavilion 710 which has
an AGP 4X port and it's hard to find an AGPP 4X board nowadays. The port
appears to be a universal port since it has a single slot. However, I
have been told that some poorly designed AGP 4X-only ports also ...

I've got a brand-new HP M8200N media centre and for the life of me
cannot figure out how to capture my VHS input (plugged into the front
panel as composite video 2 and audio 2).
The HP help desk offered to sell me a premium support ticket - argh!

I have an HP 4100 dtn that outputs pages where the top right corner is
bent or dog-eared. I've moved the trays to different slots and tried
all three trays, but to no avail. I've also replaced the toner
cartridge. Any suggestions on how else I can tackle this problem?

I'm trying to substitute the COMPAQ DL380 (G1) Server Mainboard with
my VAX 4000 KA54, NVAX 100MHz Mainboard to get rid of the BA42A Case.
The mechanical rebuilding is simple.
The SCSI devices (4x36GB,Plextor-CDROM und 12/24GB DAT) are identified

is there a driver for this all in one HP printer/copier/scanner that works
under win98se?

I'm having some problems with the a/n tower.  Its 7 yrs old but makes a fine
"desktop/backup" to my notebook.  The previous owner gave me a Two-pak  HP
Pavilion Recovery set which I had to assume was for the machine.  When I
tried to run them thru the 9680, I got a "wrong ...

I use my Dell laptop for my tasks but was given a HP9680C (Yr ~2000  Win
98). My wife will be using this one on our desk for day to day
computer/internet tasks, replacing an older HP which has no NIC and is only
connected to the router via USB adapter and crashes at least once ...

Hopefully this is the right group for this.  I have my wife connected to her
workplace from home, and she uses pre-printed forms that she sends to my HP
DeskJet 960cse.  Everything works great--data lines up perfectly in the
form's fields.  But when she gets to work, the printers ...

The recent Integrity servers (rx6600, rx3600) use C19/C20 connectors (instead
of the C15/C16 in previous machines) for their power supplies. Unfortunately
when using original HP power cables, these fit quite loosely into the power
supplies. Combined with slight vibrations and a ...

Posted hours earlier but unable to find.
Trying to install a HP G4010 scanner and get blue screen-registry error-stop
each try. HP online has been no help.
Anyone here can help with anything about this?  please

Just about to order a new HP All In One Laserjet which has 1 USB port and
one Ethernet port.  I connect using my laptop to a company VPN and so when
this is connected I cannot access printers or shares on my local network as
the LAN card's IP is seen as one from the VPN DHCP ...

According to the HP website, all these Jetdirect cards are compatible with
my Designjet 650c but what is the difference between them? Is there a
reason to pick on over another? It's an ethernet network.
J4100A

My hp workstation xw4100 has a Hipro 280 watt power supply unit. I am using
the workstation running Windows XP Pro as a stand alone computer.I want to
increase the wattage to at least 400 watts  and to replace the video card. I
have a 400 watt ATX PSU from a prior machine but it ...

I installed my NVidia 7800 GTX PCIe in my dx5150 MT, after upgrading
my power supply to 550W. The video card is connected to the PS as
well. I have "PCIe" selected in the BIOS as the preferred video.
About half the time I boot, the NVidia card works and I can use my

I have my own box version of Windows XP and I wonder if it is possible
to install this normal Windows on HP laptops?
I'm asking because I know that for example Fujitsu-Siemens requires
specially prepared version of Windows and it does not allow normal