Hello all.  I bought a ZE5300 from a Pawnshop about a week ago, and
just found out that the BIOS setup is password protected.  The owner
of the pawnshop will not give me any information as to the previous
owner, so that I can ask for the password.

Cannot get Printer director on my screen.
Originally installed printer on Win 98.
Trying to use on WinXP.
Original install CD was for Win98

I can upgrade my router's hardware with a faster CPU (a non-MMX Pentium
with 166 MHz) more suitable for encrypted networking. This specific CPU is
mentioned in the tech manual for the Vectra XM5 series 4 system board and
certified (P54C).

Have a 14 month old a250n that just beeps on start-up, one long, pause, two
short. I have no manuals and can't find zip on hp web site.
Powered modem, cables to all drive one at a time, still beeps. this is
pc2700 memory in a dual piece config, popped them and still same, popped ...

Every time I put my laptop pavilion back on after going into sleep/stand-by
mode the wireless connection is gone, when I look true the devicemanager I
see that  the networkadaptor is blocked by windows with errorcode 43, I have
already reinstalled the networkadapter, reinstalled ...

I have purchased a designjet 2500cp at auction. It fires up through the
initialisation stage ok but stops at the check printing error ink system.
Specifically it it says that the magenta cleaning unit needs replacing.
Most of the ink in the four cartridges is empty except the ...

Hello everyone !!
I don't know if this is the right group for my question, since it's more
about hardware, but I'll try:
I have an old machine, an HP Vectra 486/33U, which used to be a server (a

I recently attempted a purchase of an HP laserjet 1320 nw printer from the hp
uk website.
On the website, the printer was advertised at £329 including VAT (sales tax)
I was charged £428 pounds sterling before tax.

System:   hp pavillon ze4610us
o/s: win xp pro
hd: 40 gig samsung
198 meg ram

I opened up my tower yesterday, to see how much RAM I was running to
find out if I should upgrade because my system has always ran fairly
slow (XP Home).
I was surprised to find out that I had 512MB and not 256MB, but I

Can you please kindly advice me on where can I download the manual?
Or do these hubs have uplink port?
Thank you very much.

I am having trouble with my Cd-rw. Lately it has started not to recognize
any cd I put into it. It will play movies (dvd) but refuses to see any other
type of media.
I am afraid to try to reformat in case it does recognise that disk also. Any

I'm affraid I made a big mistake. I tried to upgrade firmware to
J.08.49 with HP Web Jetadmin 7.6. During upgrade everything went fine
except the crash! Now the device is only reacting to a ping but it is
impossible to manage it via http. I've as well tried to use

When I print, I am getting ink lines down the page - vertically. I have
cleaned the rubber rollers and there is still a problem. I have a DeskJet
970Cxi and would appreciate any help!
Thanks!

Printing anything has a nargin of 3/4 inch at bottom this even show in
preint preview this is second printer that does this HP says ink caused
damage this one is brand new they are just avoiding doing some research
seems like something else is dictating a bottom margin set anyone ...