Anybody know where I can get a set of Recovery
CD's for a Pavilion 6356?
I need a copy of Disk 1.
If someone can burn me a copy

I've just purchased two 128MB memory modules. 100Mhz, 168 pins, SDRAM,
DIMM, Micron brand as recomended by manual. Micron part No.
MT16LSDT1664AG-10EF7. When installed they are recognized, but system
freezes after some minutes. I've tested both modules independently and

Hi Group,
I am running a p4, 2.66gh with 1 gig of ram. I have two 80gig hard drives
almost empty.
Yet when I come to print on my HP 1220c printer in best format and set to HP

Been trying to get this printer to work with my D-Link 824VUP for hours.
Anyone had success with this?  As soon as I unplug the printer from my
computer, it disappears from the list of printer devices installed.  Guess
this makes sense.  But, when I plug the printer into the D-Link ...

Can somebody provide me with the correct part # for the HP 9000 D380
RS-232 Cable for a HP 700/92 Console?  If you know of an inexpensive
place to order one or have an extra laying around you would part with,
let me know that as well.

I've installed DeskScan v.2.8 for my HP 4p scanner with no problems on
XP Pro -- I was afraid it would give me problems.
Is there a way I can make the window bigger when the DeskScan software
opens up -- it is so much smaller than it was in Win 98.

My sister's PC is beyond help, and she's apparently 'misplaced' the CD that came
with the system.
If you have a copy of the recovery CD for a Compaq 6435CL, I'd sure like to hear
from you. .

HP h4350 POCKET PC w/128MB card included, Mint, new in the box.
$375.00 USD, via USPS MO only
Thanks, Tom

I have a pavilion notebook with an AMD CPU.  I cannot find a way to
get the CPU off.  There is no latch, no screw to turn, nothing.  Is
there an alternative way to get it out?  I'd like to try it in my
desktop motherboard to verify the CPU is still good.

I've tried to add 256MB HP Proprietary Ram to my computer which
already has 128mb.  It will not recognize the new ram even if I
remove the original ram and replace it with the new Ram.   Can anyone
tell me what's going on?

I just bought a HP 5100tn Laserjet printer.  I'm going to buy a
duplexer unit, and was told I may need to upgrade the RAM and or
install a hard disk in the 5100tn.
It will mostly be printing standard buiness stuff... e-mail, word docs

According to HP web site my a530n (AMD 64 3200+) should be able to use
PC3200/2700/2100/1600 DDR DIMMs (184-pin), and is HP/Compaq approved for
maximum of 2 x 512 MB (1024 MB total).  It came with 1 x 512 MB PC2700.
I purchased a 1 GB matched set of OCZ PC3200 RAM (2 x 512) which ...

I have PSC 2510 AIO and have a recurring set of problems.  First, the print
spooler often crashes and I get a Windows error message to that effect when
I send a print job.  At that point, if I check the printers menu in Control
Panel, it shows I have no printers.  I can refresh or ...

Hi all.  My brother has inherited an HP Deskjet 694c.  It is recognized by
Windows XP with the driver installed (even uninstalled and reinstalled the
driver).  I have tried to use it on two XP systems.
When I go to print, the paper is sucked in for a brief second, just inching

I need to repalce the hard drive on this pos but I can't see the
hidden screw to get it out.  Could anybody who's had one of thease
comps apart tell me how to get the drive out before I smash this POS.
Thanks