| Thread | Last Post | Replies |
|
| Heatsink for Intel Core2 Duo? | 31 Jan 2007 23:37 GMT | 5 |
I am looking at upgrading my system, to an Intel Core2 Duo - E6600, with an Asus P5B-E mb, and 2gb ddr2 ram. I have built, mainly AMD systems in the past, and would typically get a better heatsink for the cpu, ie Thermalrite...
|
| USB to PS/2 adapter that is compatible with MS 4000 keyboard | 31 Jan 2007 21:02 GMT | 22 |
I really like the Microsoft 4000 keyboard, but can't use it on my older computer because the BIOS doesn't support USB keyboards. I've used other USB keyboards on this PC without any problems using a simple USB to ps/2 adapter. The MS 4000 keyboard doesn't work with
|
| shouldnt comp still post without a cmos battery | 31 Jan 2007 19:41 GMT | 18 |
Shouldnt a comp still post even if the cmos battery is dead or taken out?
|
| New CPU fan not working | 31 Jan 2007 15:24 GMT | 4 |
When I booted up my computer the other day, I got the message "CPU fan has failed" and it shut back down. Today I bought a new fan, and installed it. It still does not work! :crybaby: My husband took the old fan and hooked it to a battery and it worked just
|
| burnt out PCB on HDD | 31 Jan 2007 15:21 GMT | 4 |
HELP! I've just had the misfortune to suffer a burn out on Maxtor 250Gb SATA drive, on closer inspection it seems the 'smooth' chip has self combusted. What are the chances of getting a replacement PCB for this drive, where
|
| Case fan installation | 31 Jan 2007 15:18 GMT | 3 |
I've just had to replace my PSU after the last one started smoking. My new PSU only has a single fan (the last had 2) and as a result I've noticed that my PC temperatures are up. My motherboard goes up to 41C and the CPU to around 61C when in use. I have
|
| 1.8GHz P4 or 2.7GHz Celeron? | 31 Jan 2007 14:52 GMT | 4 |
considering buying a new mobo and was wondering which is the better / faster processor of the two i have. 1.8 GHz P4 400MHz 256kb Cache 2.7 GHz Celeron 400MHz bus 128kb Cache
|
| My Dell-600m failed | 31 Jan 2007 14:50 GMT | 12 |
I was using my 2.5 yrs old Inspiron 600m laptop. It was plugged to the AC adapter and suddenly the laptop turned off. I was trying to switch- on using the power button, and it would not turn on. The green LED on the AC adapter would not turn-on either. Then I
|
| Wireless Workstation as Print Server | 31 Jan 2007 14:47 GMT | 3 |
Is anyne aware of problems using a Wireless desktop as a Print Server? The Laser Printer is a Brother 2040 and is attached to a PIII desktop, running Windows ME. Printer works fine from the print server itself. Just having trouble seeing the printer from a remote workstation when ...
|
| my usb ports? | 31 Jan 2007 11:48 GMT | 7 |
My mobo is here: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=479 Its description says "- 6 USB ports (2.0/1.1) (Rear x 2/ Front x 4)."
|
| Re: my usb ports? | 31 Jan 2007 11:48 GMT | 2 |
Thats a big help, thanks very much. (curious as to what the deleted posts were? being branded stupid was I? lol) Thank you.
|
| outlook express | 31 Jan 2007 09:54 GMT | 6 |
Hello people. i have 6 items in my outbox in outlook express & i cannot delete them. They get sent but stay in my outbox, i have recieved emails from these people that they are getting constan emails from me.
|
| Group challenge | 31 Jan 2007 07:31 GMT | 10 |
Is it going to be possible to improve the performance of the following PC on a £100 (UK) budget. Performance improvement required for 3D gaming mainly and if possilbe, general windows use: Socket A Athlon 2500+ (undervolted to run cooler)
|
| My Dell-600m failed | 31 Jan 2007 02:45 GMT | 1 |
I was using my 2.5 yrs old Inspiron 600m laptop. It was plugged to the AC adapter and suddenly the laptop turned off. I was trying to switch-
|
| TFT monitor DVI : no posting of starting when booting (no signal) | 30 Jan 2007 21:27 GMT | 5 |
I changed my old CRT monitor for a TFT one (Mirai). When I use the VGA connection, I can see all the starting sequence : post, lilo, launch of kubuntu (GNU/linux). But if I use the DVI connection, the monitor doesn't receive any signal untill the desktop starts. In this case, I
|