I'm running a prescott 3.2E on an abit is7 (latest bios version, 24) and I
just can't seem to cool this beast. I'm not overclocking and I have no other
hot components in the case. I'm using a Zalman CNPS7000B-AlCu cooler set to
full. It gets pretty hot around here, and room ...

I have a new 1gig OCZ Rally USB memory stick. It's not working properly and
I'm hoping for some help...
Plugged it into my Windows MCE 2005 PC earlier today. It installed fine and
I copied a number of files to it. When I was done, I ejected the drive.

I'm currently working on a project which involves release and renew of
the ip address, and the errors that the helpdesk might see.
The issue is that in my device manager I can see a bluetooth adapter
(driver is installed), however do not have the hardware installed on the

I'm shopping for a new processor and am comparing the Athlon 64 3200+
and Pentium D 930.
I am leaning toward the Pentium D, but was wondering if anyone has had
any problems with them overheating.   Also if people have had problems

Can any-body suggest some automated DOS based testing tools for
integrated graphics testing       of a computer.
I know about Amidiag ,display mate DMU and Checkit.
Is there any other DOS based tests more effective than this.

In a hard disk having two partition, I will format one partition with
FAT32 and other partition with UDF file system.
The windows doesn't show both partition. It will show only FAT32
partition.

I have a SD Card that I'm selling shortly since I no longer have a use
for.  My question, I know with a hard drive it's important to securely
erase it.  I use a program called KillDisk but is the same necessary
for a SD Card?  I already used Windows Explorer to erase all files and

I have an older Gateway E-4200 machine with a Intel 440BX motherboard.
BIOS revision is 4MPB0X1.15A.0018.P09
It originally had a P2 300 MHz, which I replaced with a spare P3 Katmai
500 MHz I had. It worked fine except the BIOS reports the processor as

looking to buy a new computer the one I am looking at does not have a
parallel port. the printer I have only has a parallel port. can I use an
adapterfrom parallel to usb? will I need any speial software?
thanks,

I've been running Win98 on a 40G for a few years (an upgrade from
Win95B, which was an upgrade from Win95A), and it's getting about that
time to upgrade. I have a full version of Win2000 Server (not an
upgrade), so instead of formatting the existing HDD, I plan to replace

I'm trying to disassemble this optical mouse, but I didn't find the blueprints anywhere. After unmounting the two screws in the back of the mouse the front part is still firmly jonined, but I can't find a reason why, neither the way how to disjoint it without breaking anything. ...

I have bought a new Seagate SATA drive as my system was very slow due
to hard drive problem. However, I want to continue using the older hard
drive as a additional storage. I installed windows on the SATA drive
and both are connected as masters. But the startup is still slow as it

My current system have the following storage settings:
- Seagate ST380013AS 80GB interface SATA 1.5Gb/s
  with 8MB cache.
- Single FUJITSU MAP3367NP 36.7 GB Ultra320 SCSI

I'm trying to print with a panasonic  KX-p2123 in windows 98SE using adobe acrobat5.
The printer is installed and working, but I can only print one copy at a time.
I've had this same setup on previous computers and everything has worked as you would expect.
I've been through all ...

Having a problem with my pc. Gigabyte K7 m/b running AMD Athlon 2400.
A while ago it started not powering up sometimes and required me to
pull the cord out from the power supply and replace before it would
power up.