Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsPC HardwareCPUMotherboardsVideo CardsStorageNetworkingPeripheralsBrand Name Systems
Related Topics
Video GamesWindowsMS Server ProductsMS OfficeMore Topics ...

Hardware Forum / PC Hardware / General Topics 1 / May 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Printer Issue01 Jun 2005 00:27 GMT2
Printer cuts off right edge when printing internet pages...how can that be
fixed?
new motherboard and old memory31 May 2005 20:02 GMT4
on my old motherboard i have 768MBytes of RAM which is of the pc2100 type, i
am looking at a motherboard which says
DDR400
DDR400 (PC3200), the latest and fastest DDR memory standard, supports
upgrade question31 May 2005 18:32 GMT3
I have an Asus aq7v8x motherboard (FSB 2x133)with a 2.0 Ghz AMD Athlon
XP processor.  It's a bit slow for some of the vfideo tasks I set it,
so I'm thinking of upgrading with a Novatech bundle.
They're offering a Pentium 4 3.0Ghz processor with an unnamed
Is my system FireWire 800 compatible?31 May 2005 18:13 GMT1
I'm a little confused. I built my system nine months ago with an FX-53
(since upgraded to an FX-55) on an ASUS SK8V board. I wish to purchase the
following card, but I don't know if it's compatible with my board (OK, it
will work, but will I achieve 800Mbps speeds?) I may not ...
External USB Hard Drive-format needed31 May 2005 17:42 GMT6
I put together an external case and a maxtor had. XP found it, but it does
not appear in my computer as a device. what am I doing wrong?
TIA
bad gbit nic31 May 2005 17:41 GMT1
Intel Pro 1000MT Gigabit Network Adapter.
One of the cards we have is giving me strange indications.  It will not
install on W2K Pro or Linux but another card installed at the same time
is reading fine.  The diagnostic software that comes with it is telling
Help!31 May 2005 14:37 GMT1
I recently put together my first computer, and I've been having problems
that I've never encountered before.  
Everytime I run a program of a decent size, say, World of Warcraft, I
get a Machine_Check_Exception and my computer freezes.  Everything
clicking hard drive31 May 2005 09:49 GMT5
Hello, I have 3 westren digital hard drives that "click" from power on. Is
there anyway to make these drives usuable again?
Adding memory31 May 2005 08:11 GMT11
I currently have 256mb ram (ddr 333) and i bought another 256 stick to
boost it to 512, but every time i add it, when windows loads it gives
me the blue screen with page fault or some other error, pfn_file_list
corrupt and a memory dump, and it says Windows has been shut down to
What is the difference between nvram and cmos?31 May 2005 04:23 GMT5
Are there any differences between nvram and cmos (if so what may they
be)?
How should the nvram be cleared (by jumper/bios or other way?)?
What relation does the bios have to nvram and cmos?
Hard drive stops during operation31 May 2005 03:32 GMT3
Have a abit NF7-S rev 2, sata hdd 250 gig, xfx 6800 gt. When I internet my
hdd stops when I scroll through the page. I hear a "klik" and my system
freezes for about 2 seconds. Then I can work again. Does anyone know this. I
hope so because gaming is out of the question. The more I ...
cd drive problems31 May 2005 03:32 GMT12
hi i have a dvd and a cd writer on the sane ide cable dvd set as master cd
set as slave.
problem is some times if i put a dvd in to the dvd drive i get a no cd error
and when i go in to my computer the cd and dvd dive have gone.
Partition Utility30 May 2005 22:50 GMT49
Partition Magic 8 is worthless for my system. I have two HD installed
and both have the Active bit set. The BIOS is smart enough to know
that and allows me to choose which one I want to boot from.
Windows is not as smart - it issues a STOP0x9F POWER_FAILURE    error
Wireless card that support WPA & Win 98?30 May 2005 21:24 GMT3
Hello I have a Belkin modem/router and wireless network card, and I want to
upgrade from 128bit WEP to WPA-PSK. I set up the router OK. The network card
doesn't see the network. It says on the box that the card supports both
Win98 and WPA. I contacted Belkin who say WPA only works ...
Disabling Onboard Video30 May 2005 15:27 GMT9
I have a Leadtec Motherboard (WinFast k7ncr18) and I wan't to install
a better video card. There is an AGP slot. I have found instructions
on the Nvidia site for doing this but I can't find any info on what's
needed on the motherboard end like jumper settings or BIOS changes.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 April, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2010 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.