Hi, I might be totally wrong on this, but I have an Actiontec GT701
router from Qwest. I had one computer connected via the USB port, and
the other via the ethernet port. They both had no trouble accessing the
internet. And after running the network wizard on both computers within

I'm trying to set-up a one-off DSL WiFi access point for a cafe, and
I'm trying to identify an integrated AP that provides a very simple
splash page (authentication not even required) to display on the users
web browser before they continue on to the web.

The couple times I've called up Verizon to get a DSL setup running the
first question from the support person is have I installed filters on
all existing phones.  That's resonable,
The next question is how long is my inside patch cable?  Huh?  I've

My brother bought a dsl system from sbcyahoo which included a 2wire
1701 router and signal filters for the wall sockets. He was told that
he could plug his incoming phone line directly to the 2wire, then plug
his lines that go to wall receptacles throughout the house into the

I need some help with what to do here.
I run a small business on the side with 20 clients.  I run some web
site, do some mass emailing, etc.  So, DSL connection is a MUST for me.
My DSL company is called Speedsite.

Am a bit confused. <smile>
My activation date for dsl is next Tuesday.  I already have all the software
& hardware.  Does someone actually come out to the phone box & do some
tweaking or is it done down at the central station.  Nobody said I had to be

Well, it was supposed to be a rewarding afternoon, if not fun. I got
sick and tired of all those silly little filters that have to be put
in line with every phone in the house in order to use ADSL. Also, a
guy from SBC told me that the more twisted-pair between the demarc and

I've set up a bunch of ISP connections where the provider gives me a
multiport router/dsl modem.  I know I can hit the modem at 192.168.1.1
from any browser and enter the dsl account and password and go.
Can I do the same thing for the single port DSL modems?  

There is an ADLS access point with en Ether routeur and a server with
WinPoET. The Internet acces from the server is OK. The public Internet acces
is known.
Is it possible (with WinPoET) to open access from Internet to the server (in

hi can any 1 tell me if the pc my adsl modem is plugged in 2 if teh pc
is off will any other pc's on the network be abel 2 conect 2 the
internet, if you no the answer can u pls let me no @
mike_emons2003@yahoo.co.uk or michael181182005@hotmail.co.uk. it will

I have been accessing this NG through eagle.america.net.  I will no
longer have this since SBC does not support Usenet.  What NG can I
subscribe to that would get me here?
Thanks.

Ok, any DSL provider out there can provide me a /28 routed subnet in
Arlington TX area? Zip code is 76017. The phone number I want to put
this on is 817-467-xxxx.
No sticky, no dynamic, no PPPoE, no NATing. I need 14 useable public

I have the new 2Wire Router up and running however I am having a
problem with the computer at the other end of the house.  It is being
connected to the router via a 2Wire USB adapter.
The message is "limited access -- network did not assign a network

Started my DSL career with "Don't need no steenking WiFi" so I got a plain old
LinkSys BEFSX41 "FireWall Router".
Now I've just replaced my old PDA with a Palm TX and want to dabble in WiFi.
Consequently I ran out and bought a LinkSys WRT54G "Wireless G Broadband

How do you use those /29 sticky (static) IPs from SBC and be protected?
Our office LAN 192.168.0.x network is simple. Only two PCs (one of
which is wireless getting IP from our linksys router), one networked
printer, and two network cameras (SONY SNC-M3).