I have some web pages I want to block so my users cannot access them.
Can that be done with a ASA5505 or do I need a ISA?
Best regards
Martin

I have a switch and a firewall. Firewall sends logs with the information
who has logged in to it, when, from which IP and what commands executed
to my syslog collector (linux server.) This is the configuration:
logging enable

Cisco's not supporting a 64bit VPN client is forcing us to take
another look at how we Authenticate to out VPN.
We currently have a PIX 515e and are using Certificates to
Authenticate the users.  We have a MS Cert Server that Issues the

I have an 1801 DSL router to replace a Netopia 2247NWG which was
originally supplied by ISP. The 1801 has DSL port, Fastethernet0, and
8 x ethernet switch ports. When looking at the config there is also an
ATM0 interface. The ISP supplied an example config for using a Cisco

Someone knows  oid to get numbers of remote access users and active l2l
tunels ?
thx
Ted

Hi, I'm having a problem with a 3845 at work. One of its ethernet
interfaces can't establish EIGRP neighbor relationships with routers
in the same LAN. The odd thing is that I receive UPDATES from these
routers, but do not receive any HELLOs. I'm really stumped, and I'd

I'm getting the Below Debug info when I try to Connect my Client to
the PIX 515e.
The Client is an iPhone. Seems like I have all of the Transforms in
there.

Looking for the least expensive solution for answering analog modem
calls and being able to collect and pass through caller-id as a radius
attribute.
Looked at 1700 series platform but I can't find a definitively

In the past week or two, I've hada three or four Gigabit Ethernet
interfaces on about as many 2960s go down and say "err-diabled".  One
doesn't even have anything attached to it!
SES-Distribution#sh int Gi0/4

is there a legit way I can get hold of Callmanager Express 4.1 or
earlier? I've been told this is what I need for a 2600 router.
I've tried some resellers, they say discontinued, no can do. Thanks for
any advice.

I have a 4-port Cisco Systems Intelligent Gigabit Ethernet Switch
Module for IBM blade centre.
BC1-UPPER#sh ver
Cisco Internetwork Operating System Software

Seems like the AnyConnect Client v2.2.xxx does not Support IPSec. So
of course it is not going to Support IPSec using Certificates for
Authentication.
I cannot use the Cisco VPN Client on my 64bit Systems, so what are my

Cisco 2651XM router
fitted with ...
NM-16ESW 16 port switch
I was going to buy a PoE daughtercard (PPWR-DCARD-16ESW?) and fit it to

I have two 12 miles distant offices. Cisco 3750 L3 switch on each side
are connected via private PTP 1Gbs fiber link. Recently my company
installed private PTP wireless backup link in case that fiber gets
cut. Please note that wireless link should be up at all the time on

So we are looking into upgrading the Cisco PIX 515e with the ASA5510.
We are purchasing all new Vista 64bit laptops for mobile users and
need them to VPN into the Office. They need access to more then Jsut
SSL enabled Applications. THe Old School Cisco Client was great and I