I was hoping someone could point me in the right direction. Our
satellite office has a T1 for it's internet access and a Point to
Point T1 that connects it to the main office. The Point to Point is
used for mainly for Voice although I believe some years ago data as

I'm setting a vpn lab and there is one thing I don't really understand
from show crypt isakmp sa output.
The HQ router (10.0.0.1) is terminating all vpn connections. However I
need a clarification about dst and src columns in the following output.

Hello. I have a client that currently uses a Cisco VPN 3005 concentrator.
Remote employees use the Cisco VPN client to connect to the concentrator and
access servers on the company's LAN. They have been using this setup for
many years and it works great. My client has recently ...

This question was originally posted on 8-31-08 under the topic "What
version software to run ASA 5505" and I haven't had any response,
probably due to a confusing subject heading.  I apologize for the
confusion and for the double post, but I would appreciate some

Pardon me for any indiscretions, this is my first time posting to this
group. I have a Cisco 1720 router with IOS12.3(26) . It's Outside
interface has a Primary IP from one carrier, and a Secondary IP from
another carrier. I have it filtering and NAT-ing SMTP traffic for our

Is there anyway to secure the data transmitted wirelessly without
using pre-shared keys for encryption? I'm trying to allow residents to
connect to the wireless network without having to go around and put
wireless keys on all laptops. I'm using 2811 routers with wireless

 I needed help in understanding the following in the Cisco PIX
config ,
 I have network Object-Groups named SMTP_SERVERS,EXCHANGE_SERVERS
 And a Service object-group named SMTP

Hello at all,
i´ve a problem with the cisco 876 integrated services router.
The router´s ios-version is 12.4(11)T4 and it has a ADSL2+ (16 Mbit
downstream  / 1 Mbit upstream) connection.

Select 802.1x  Network Authentication and the md5-challenge.When the
windows client access the 802.1x Restricted Network, the windows
raises a dialog to
query  the username&password.

I have this situation, cisco 2811 + some catalyst 3560, connect in
"trunk mode" and other unmanaged switch connect to catalyst 3560 with
port configure in "access mode".
Cisco 2811 term every vlan using sub-inf in "encapsulation dot1q vlan-

How would I find the exact Cisco 2950 switch port that a workstation
connects to, switch has one VLAN? I have IP and MAC address of
workstation.
How about a Dell 3424 switch? Thank you.

Question on configuring ISLs between a pair of Cisco MDS 9222i switches
with VSANs:
I want to have an ISL (actually an FCIP link) between 2 VSANs, 1 each on
a pair of Cisco MDS 9222i switches. I do not want the ISL to link any

Hi NG,
I bought an used Cisco Aironet 1231 on ebay. Not I´m having trouble
with the device.
The Ethernet Interface from the Cisco Aironet gets a IP via DHCP. I

I am trying to configure the cisco pix (501) to allow access to the
PDM over a Cisco VPN Client IPSEC tunnel.
I found a situation for accessing the PDM ove a site-site tunnel but
am not able to configure it for remote access VPN

I've got an error when I issue :
Router4#reload at 19:00
%The date and time must be set first.
I have check for this error message but did not find the reason of the