Hi all,,
I have Some issues In BGP as Following::
I need brief Explanation about what difference between Redistribute
Connected Command and

I work for a company that has several thousand stores and in an effort
to get them off of dialup, we've designed a configuration that would
make a Cisco 877 the default gateway, but on the same network would be
a VSAT router.  If the DSL connection goes down on the 877, a floating

Hello group,
I have a Cisco 871 router that I am attempted to use replace my aging
Netgear router. Things are working, er, just ok.
I utilize hotmail, my fiance uses live messenger, and I have an Xbox360.

stp convergence time =50s or 30-50s? why?
TIA,
st

Trying to block access from "inside" to "dmz1"...
interface Ethernet0/1
nameif inside
security-level 100

I have an 837 ADSL router running for a few years now, and my provider
is telling me they are wanting to upgrade us to using ADSL2 which is
not supported on that model.
Does anyone know the model of router which supports ADSL2?  This

Could anybody please put some light on the ASA license model? For a PIX,
there were interface and user-based licenses. The ASAs also have VPN
licenses but I'm pretty unsure how that works ...
Concerning interfaces, thngs are clear. In my understanding, "users" in

I am trying to set up my PIX 501 with a static IP given from my ISP.
I am able to access the internet from my network when the PIX is set
to its factory default configuration as dynamic on the outside
interface, but when I set it to static and put the IP and subnet mask,

I need to do some IP address rearanging on my Cisco ASA 5505 as I am
currently not using NAT and I want to get it to a configuration where
my external IP addresses are on the outside interface, and I can use
static NAT to map specific internal IP addresses to public IP

I have some ports forwarded to the outside interface on my ASA 5505.
Here is an example:
static (inside,outside) tcp interface pop3 192.168.1.2 pop3 netmask
255.255.255.255

have an issue getting emailthrough the Cisco ASA to our email server
is 10.100.50.172 255.255.0.0
Everything else is working. We have internet. All outgoin traffic is
OK. Is anybody see what's wrong. Thanks,

What is going on, My Vista home ultimate HP dv9000z notebook is
sending LAN a MAC: 00-00-00-00-00-00, I tested it with a fluke
Lanmeter and verified that it is as it appears. When I used ARP, I am
also showing a print server as having the same MAC:00-00-00-00-00-00.

Should the ingress option allow me to connect to the host on the
destination port with SPAN enabled.  It isn't
Session 1
---------

Ok, I'm new to this so bear with me.
When I connect to one of our switches running ios vs 12.0 via the
console, I am able to type commands normally.
However, when I log in on a VTY via telnet, the login is successful

I am looking to make a home VOIP network for a lab and was wondering
what types of interface cards I would be needing to pull this off with
an analog phone line. Any help would be great.
Thanks!