Does anyone know where I can download this from including the following
feature sets:
12.2T Enterprise/IPSec/FW/IDS  /3DES

Has anyone ever tried to run CallManager on a Virtual server?

Hey everyone :) I'm interested in implementing an authentication
scheme in my network for the network devices, other than using static
MAC addresses which aren't thought of as particularly secure. The idea
is something similar to Dot1X (certificates for example to

Our VPN router works with a dynamic address but we need to assign a
static address.  We change the Dialer0 int from ip address negotiated
to ip address 123.123.123.123 255.255.255.248 which works and all
tunnels come up again and internet connection is maintained.

Both the books -- "Inside Cisco IOS Software Architecture" and "IP
Quality of Service" mentioned "calendar queues", but hadn't given
detailed description -- how calendar queues like? how it works
internally?

I have the install archive for the Cisco VPN client (vpnclient-linux-
x86_64-4.8.00.0490-k9), but when I try to install
it, it barfs. I took the defaults as follows:
* Binaries will be installed in "/usr/local/bin".

Ok, so I'm not far enough into my cirriculum to know how to configure
the 2511-DC, but I was wondering if there's a way to use it to use the
1-16 Async interfaces to connect to console ports on my multiple pieces
of equipment and manage them via that?

I'm trying to gain access to my Cisco SB 107 router, which is
connected after my ISP's router running in bridge mode. Problem is
that when I connect my IP to the Cisco router, I get a public IP and
not an internal IP - so I'm unable to access the web interface.

If there is a more appropriate forum for this post, please point me in the
right direction.  But you guys are generally such a font of knowledge, I
thought I'd start here.
Some of our users use a web-based application, and they are constantly

Is there anyone able to provide me with working MS IAS RADIUS server
configuration for downloadable ACL? I'm hassling with this whole day and
everything that I found googling around doesn't work.
I need downloadable ACLs to get my ASA acting as a http proxy. HTTP

I need to configure a switched network, based of some catalyst 3750
(ios12.2(40)) in an extended star topology with a basic multicast PIM
configuration in sparse-dense mode.
I've read something about but I've never do it.

I have a Cisco 2620 router running IOS ver 12.0(7)T.  FastEthernet 0/0
has an ip 69.92.216.130 255.255.255.252 FastEthernet 0/1 has
69.92.216.145 255.255.255.240.
When I run show ip route it shows:

This is just a minor annoyance, but I'll ask just the same.  When I
access my Cisco 2801 through a web browser (IE, in my case), using a
https session, I get the message "Certificate Error".  I just click
through to continue.  Now, I know I can click on the error button and

Helo
I have network a.b.c.d/23 in my bgp configuration on my c28xx
On the same router on my LAN interface i'd like divide  clas /23 on some
 subnets 4x a.b.c.d/25  etc and i have problem.  When i configure

   Ran into a question as follows:  "In radius security architecture
what is the network access server", and the answer is the
authenticator.  This makes me wonder how is this different from TACACS
+?  In both, there is a NAS that receives the request from the user