Hi Guys - anyone know how to clear a rommon password?
Ta,
Paul.

can you please give an advise how to configure port-channel between
cisco 2811 router and cisco 3750 switch stack.
Switch 3750 stack uses stackwise tech.
on switch 3750:

So I'm about to acquire the gear to get my CCNP. At the Occupational
Advisory Committee meeting at the technical school I graduated from,
some of the members mentioned that theres a possibility that the gear
could be a knockoff. Is there any way to check on this other then having

More specifically, I need to install one into an empty slot.  Can
anyone say whether it is hot-swappable or not?

Im having the problem that when configuring the pix in the pdm it
times out and gives a username/password error. So is there a way to
change the timeout for the pdm in the pdm/cli ?
Many Thanks

I have the following network configuration:
LAN: 192.168.1.x/24
192.168.1.250
SonicWALL

just a simple question: how can i access my firewall from my pc
( inside a network ) by the web ( i now the password)? Thanks

I have a 4507R at the core of my network with trunks extending to the
access layer switches (3560G) where I group ports by vlan. I want to
daisychain a second switch and have the same ability to group ports by
vlan as I do on the first switch. I defined a second trunk port on

I have a cisco 1841 with a HWIC-AP installed and using c1841-
advsecurityk9-mz.124-11.T.bin
After I copied the new bin file to the CF card SDM failed initial
installation. Also with the original CF card the installation doesn't

I have a router cisco 3620, but when i have sent it, i don't
have put a enable password. Only a password on the telnet connection.
I connecte it by a local telnet connection without problems but when
i want access in enable i have:

Have three switches, WS-C2924M-XL-EN, each with a console cable attached,
can't get one of them, SW1,to respond.  All running 12.0(5)WC17
                       SW1
     WS-X2931-XL              WS-X2931-XL

Hello. I am betting someone has an easy answer for this.
I have configured a PIX 506e to do ipsec remote client VPN.
Cisco VPN Client 4.8.00.0440 currently works. We can connect to the
VPN simply based on the group name and password.

I search a software to monitor VPN session.
Login / Logout / Login name.
Thanks for your support

I'm trying to implement WebVPN solution using Cisco SSL VPN Client
(sslclient-win-1.1.0.154.pkg) on ASA5505 (sw. ver. 7.2(2))...
After WebVPN authentication ASA automatically starts with SSL Client setup
process, but it fails each time after download is complete with the

I want to log all the users connecting from home to the corporate
network with there vpn client. we have pix 515E I already configured
the pix to send
syslog messages to a syslog server, how I configure the pix to also