Colleagues,
After IOS upgrade from 12.2(27) to 12.2(46) callback stopped working
with the following message:
1951: TTY38 Callback PPP process creation

    I have Cisco 2610 router and occasionally it crashes.   I kind of
suspect it had do something with IP Input but not very sure.    Here
is output
Dircm#sh proc cpu | include CPU

I know this is lame to ask, but I really need help creating policy
routing and don't have a test environment.  Here is my scenario
Main Site has a PTP and a Frame relay going to a remote site.
Main Site:

Good day to everyone.
I have been toying with a PIX 501 running v. 6.3(5) and have run into
a routing issue.  The configuration for this unit is very basic at
this time.  All it is intended to do is stand as the gateway to the

My Lab currently only composes of two 2503 Routers and i want to expand it
with a Router that has Slots and Flash so i'm looking at a 3600 Series, at
the moment i found a good deal on a Cisco 3620 with NM-1FE, fully RAM and
20MB PCMCIA Flash card, would this be ok for a the CCNA or ...

Guys,
I changed an SB Server 2003 from company1.local to company2.local
using DCPROMO and now I can no longer use Server Manager Console. Any
reason for this or what can I do to re-install only SM?

I have a few Cisco 2960 24 and 48 port switches plus a couple of Cisco
3560 24 port switches. As part of our repair procedure for cold swap
we are looking at swapping over the flash memory from the potential
faulty box to the new box in order for quick config load. However, I

Switch is new maybe user 5 hours so when i plug in console cable i get
Unreadable characters i try to change computer console cable etc.. but i
still get  Unreadable characters did any one know whats happening pls help..
tnx

I just put a new 2950 on the network. The core is a 4507R. I already
had 46 2950's on the network. ON the new one I pasted the configue
into it from another switch. I did change the ip before I pasted it
in. The switch is working fine, passing traffic to the correct vlans

I have a Cisco 2650 Router. My ISP has given me two blocks. 66.x.x.226
- 230, and 201.x.x.250-254. the first block works fine. I need to add
the second block to ARP I think, or I dont know how to check if they
ar added to the router. Any IDEa.

The $2.3 million home lab of Scott Morris, Quadruple CCIE:
http://www.networkworld.com/community/?q=node/16960
Sincerely,
Brad Reese on Cisco

I own a /24 subnet that I've proceeded to chomp into a /26 subnet.  I
currently have two routers on the subnet, one for the .0 network and
one for the .64 network.  Behind each router I have non-routable
address spaces, i.e. 192.168.101.0/24 behind the .0 router and

does anybody know how i could send only one ip address to my neighbor ?
thank's for all

I am having problems connecting to a remote (3000 miles!) VPN with the
client.
Sometimes I get a window pop-up and prompt me for user/name and
password.

I am researching phone system solutions for a branch office - 50 to 75
users.  I have been looking at CME and CUE and I'm wondering if anyone
knows of a bundle solution, rather than having to purchase all
hardware/software separately.  Maybe something that includes the