Troubleshooting a setup involving three 3650 48 port 10/100 PoE
switches with GBit uplinks to each other.  PC linked off the Polycom
phones which are linked off the switches. Goes like this:
Switch --> Phone --> PC  (daisychain style)

I have a PIX 515e ver 6.3 and it was setup before I got it.  It has
access groups and access lists already setup but I need to add a couple
more entries.  Specifically I need to open one way inbound tcp traffic
from only one IP address and a second entry to allow two way tcp

Internet
         /        \
11.11.11.11        22.22.22.22
ADSL Router        ADSL Router

Does anyone know what needs to be added to a privilege level to allow
use of the web administration page for the port config and such, but
not reload and reset to default?

i'm trying to configure a pix 506E 6.3 to use VPN Client Remote Access
, i found many examples using exteranal radius or tacas servers.
Is there a way to configure vpn client access using only local PIX
database without external servers?

The position: Pre-Sales System Engineer
Company    : will disclose to prospective candidates only
Locations    : New Delhi/Bombay (India)
The Company-(Will diclose to prospective Candidates only)

I am working on setting up an external SSH connect to my pix501 however
I was told that because my outside interface is set as DHCP that it
wouldnt work.  I think there may be an ability to create an alias for
that interface that references the real IP address.  Anyone have any

I've got a couple dozen switches and noticed the root is the furthest,
slowest switch on the network. If I change the root to the core will
this cause a convergence and cause all switches to
"listen/learn/forward" on all ports?

We are running the following topology
- 'Demarc' - CSU/DSU - Cisco 2501 Router - Cisco PIX Firewall - 3 x
Cisco 2950's - Users/Servers
At the moment, the router is managed by the ISP for a high monthly fee.

I am running a pix 515e and I want to copy the configs to a tftp server
that is running on my workstation at 192.168.100.25 and the tftp file
folder is C:\tftp-root. So are these the *exact* commands?
conf term

I have a Cisco Switch Catalyst 3548XL. Everytime the switch has been
turned off i lose my configuration and it goed back to default
settings. How can i save the config permanently?
Thx,

I have an 837 which is running as (amongst other roles) the default
gateway for the lan.
We recently changed our lan IP address range from class b to class c. I
changed the 837 IP address with the Cisco web interface (CRWS). It works

I have having trouble setting up a NAT translation rule for a port that
I want to redirect to a server.  I currently have one that does work,
and I have basically copied that rule, changing the port number but
still no luck.

I am interested in what software people are using in the day to day
maintenance and monitoring of their cisco equipment.
What tftp software do you use to transfer your configs?
What software do you use for maintaining/keeping track of all your configs?

I am setting up a Cisco 1841 with an external ADSL modem and Firewall
IOS. Essentially, I want to map SMTP (25) on the Public Interface to an
internal server on the same port and port 9833 (custom port) to the
same internal server but on port 3389 (MS-RDP).