I have taken in some Lantronix ETS16P terminal server devices, and I am
trying to determine if they are in good working order.  My understanding is
that they are out of service working, but I cannot get them to respond.  I
highly suspect user error.

Hi, I am configuring a new 2821 router and receiving this error:
%Error opening tftp://255.255.255.255/network-confg (Timed out)
Just wondering if I have to do anything or anyway to stop it.
Thanks-Rob

I am trying to configure VPN access on a PIX 501.  I am taking this job
over from someone and I am confused on what they have already done.
What I need it to do is be able to connect from Windows XP to the PIX
501.  Here is my current config. I see it has VPN setup, but what do I

Ciscoworks Resource Manager Essentials has an apparently useful feature
in allowing a template to be defined of prohibited and required
statements, for example,
- set snmp community read-only public

Can anyone point me to an example of a professional
network diagram that one would expect at a corporate level.

One of our remote sites needs to move their servers to our datacenter.
We need to do this while maintaining the server vlan of the remote site
so the server's addresses do not change when they are moved here.
Currently the remote site is connected over a point to point fiber

I have a problem with a router configured with 15 digitals lines when i make
authentification with a rsa securID server.
When i run autentifcation the RSA send REJECT response.
The rsa server run correctly with VPN3000.

I'm a newbie to Cisco Pix and VPN's. I'm hoping this is a simple
question.
Here are the spec's.
Cisco Pix Firewall 515e - 3 interfaces (outside, inside, dmz)

Some one know on pix 506e is possibility to make somethink like that :
if user in lacal lan will go to any www site that pix automaticly will make
some redirect to one specific(appointed)www site on outside

My bloody ISP has gone and broken my setup and being only
a bi-occasional IOS hack I've exhausted my alternatives.
I have a 1605R.
I have 5 static IPs from the ISP and previously I used the

Hi guys, i am doing backup for all the IOS, and configuration files,
the company has a catalyst 4000 that i had no problem with, but i can
not copy the flash from the rest of the switches (3750, 3550, and
2950), ONLY THE FLASH, i was able to copy the configuration file and

I'm trying to run some experiments with CAR.
First of all I tried to download an iso image from a server of my provider.
I've got a constant download rate closest to the maximum bandwidth available. The most important
thing was the constance. My line features are DW 640kbits/sec- ...

I've spent about 10 hours configing my PIX 501 today. I haven't had
much experience with networking but so far have managed to reset the
lost password (via TFTP server and password reset bin file) and got
PPPOE with DHCP for the external interface running after setting my DSL

why can't i make an ISDN call with my 1760 cisco router ?
the IOS version in use is 12.3(18) and the BRI/DIALER configuration is this:
-------------------------------------------
interface BRI0/0

I searched the cisco website, but didn't find how to configure a mgcp
announcement endpoint.
thanks a lot.