This is more of a question about possible solutions to a problem that
we experienced recently.
QUESTIONS:
-Are there any tools/protocols/setup/solutions/equipment/etc that would

Here is what I am attempting to do:
PIX525(config)# object-group network remote-host1
PIX525(config-network)# descr remote host with dyndns
PIX525(config-network)# network-object host somehost.dyndns.org

I'm hoping someone out there has the definitive answer to this one, as
I'm getting really confused! I've read, and been told, that the
network statement for OSPF should be used with subnets on which you
only want the OSPF process to run, not for networks you want to

I need to be able to set up an RV042 internet gateway to allow an incoming
PING to get to a particular fixed private IP on the inside.
I'm trying to figure out how to do that.  Any help would be appreciated.
Thanks,

can someone please help me on this as the reseller i bought my router from
is useless at support.
my current  config is:
router#show configuration

I recently upgraded a PIX 501 from version 6.2.x to version 6.3.4 in order
to take advantage of the NAT-T ability when setting up an IPSec VPN.  It
seems that all there is to it is the "isakmp nat-traversal" command, but I
still can't get it to work.  Is there any way to ...

I've got a Cisco 877 router/DSL modem running IOS 12.3.
Setting up EasyVPN server seems straightforward, but it appears to only
work with the Cisco VPN client.  Is there some way to set up the router
as a VPN server that will work with other clients, such as the built-in

A company that we work with have given us their cicoVPN client to get into
their system.  We have a sonicwall at our end.  Out sonicwall has all
outgoing allowed but strict rules for incoming.  What ports do we need to
open for incoming to get the ciscoVPN to work from our end?

I'm a Cisco novice with a small lab setup in my basement.  (1) 2501, (1)
2514, (1) 2507 running variations of 11.1 and 11.2, a few hubs and a Linksys
WAP..  I have them routing between themselves and have, at one time or
another, successfully used all of the serial and ethernet ...

When VPN clients are connecting they are asked to enter VPN group ID
and password - before their access username & password prompt. I cannot
see in the PIX config where the VPN group name and password are
configured ??? I'm assuming "user1" is the client ID and "abC123" is

I have came across a bug with a PA-2FE-TX installed into a VIP2-50.
This bug causes the VIP to crash when there is any activity on the
second FE interface.  I believe it has something to do with parity.
Does anyone know the workaround to this or the bug ID? Thanks.

when doing a sho int atm and looking at the output.
Example
143849529 packets input, 129326779238 bytes
125183986 packets output, 29173768997 bytes

I'm hoping someone can help me out here, this is definitely not my
forte!
I have a new full T1 being installed and need help configuring the
hardware. Here's what I have:

Any one got this working?

I am trying to setup a PIX 506e, and I am stuck trying to gain remote
access.  I have the PIX between my DSL modem/router and my Windows 2003
Server.  I have the DSL router set to pass-through to the PIX, but I cannot
get the remote access to work.  From the internal network I ...