I have an issue with multiple MFT E1 G703 cards which are all PPP
multilinked.
I'm seeing clock slip on the controllers and I suspect the clocking
must be incorrect.

I have a cable connection to the internet and having difficulty
understanding what is happening with my WAN IP address. Please note I'm not
using the correct IPs here.
When I connect my Cisco PIX 515 firewall to the Cable Modem (via the outside

I'm trying to set up a simple VPN using PIX 501 firewall and Cisco VPN
client to access a Win 2003 server in the internal network.
Unfortunately somebody else worked on the PIX before me and somewhere
along the line all the documentation and CD that came with it got lost.

We have purchased two 2811 routers to use for a site to site VPN. Both
routers have the VPN AIM. I have everything working in a lab now, but
it was a struggle. I'm new to this, so I happily used SDM to configure
everthing. Initially I used an IPSEC VPN without GRE. Everything went

The company I work for is currently planning to upgrade existing switches -
Catalyst 5000 & 5500 - to more modern technology.  The plan is to replace
all with 6500 chassis units-but these seem to be very high priced and are
they suited to plug in end user computers?  My ...

I am looking for recommendation on how to prevent a repeat of a recent
episode on one of the networks I support.
Pix 515E running 6.3(3) unrestricted. 3 inside networks. DMZ1, DMZ2,
and Inside. All inside networks use a 172.16.x.x ip address space. The

Is there a way i can set privilage to only allow reload?
I dont want to give the user level 15 access.  I just want them to be
able to reboot if the vpn tunnel hangs.  They are dumb users so if I
allow them write we are all in a world of hurt.

I have a Cisco PIX 515E set up with users that authenticate on the
PIX's user database. They can connect fine and connect to the Remote
Desktop server fine. The only problem is when it comes to printing to
their local printer.

Is it possible to setup a g2g using a dfl-200 and a PIX?  I can have
all the users at the remote office connect using the cisco VPN client
but I have a DLINK DFL-200 there as well.  The users are complaining
about the multiple sign in process and they are already using a VPN

I am using a Cisco 836 ADSL router and would like it to be a VPN Server
allowing people to connect with a VPN client. I read about that Cisco
Easy VPN Remote software which should be part of the IOS on the Cisco
836 but I cannot find the client software which I can install on ...

So far, when I plug in two of these cards, the router creates 2 serial
interfaces and 2 PRI interfaces...
How can I confince the router that I want 4 serial interfaces for T1
data connections?

Imagine the following scenario:
  10.0.0.1/24    .254 |-----------+ dyn. IP
  +-------+-----------+ Cisco 876 +--------- Internet (PPPoE)
  |       |           |-----------+

a customer wants to migrate a tokenring-lan (a private c-range net) onto
ethernet. On a separate eth-segment is the DHCP-server, wich acts as the
DNS-srv too.
The migrations should go as smoothly as possible. Due to lack of human

Does anyone know what does "bytes" and "bytes delayed" mean when you do
a sho traffic-shape stat
Is "bytes" the total outbound bytes on the PVC?? If so, how can it be
smaller than "bytes delayed"??

I'd like to know what is the current status of 802.11i (aka WPA2) support in
Cisco 870 series routers (esp. 877W). All I can find on cisco.com is:
· 802.11i (software-upgradeable in future software release)
· Wi-Fi Protected Access (WPA)