obviously very new to all of this...was having some trouble with my
device since getting it.  i think it would easier for if i had the IOS
instead of this VxWorks stuff....i really hate it.  Is it possible to
switch to IOS instead?  if so, does anyone have any good documentation.

I was playing a while with my 2 routers, just to see the Master/Slave
relationship but i was wondering why this router does not have the
loopback as the RID, instead it has the RID of FEth, this is ok because
the highest IP Address but I was reading that OSPF Prefers a loopback

Ive got large W2K3 IAS setup authenticating all kinds of logins.
Currently IAS autheticates users logging into Cisco Routers and
Swithces via telnet or SSH to admin the box, its authenticated VPN
users

I am currently using 1200 series APs and PEAP against MS IAS server to
authenticate "company" users for wireless.
This is working great. The machines auth with PEAP machine accounts and when
the user logs in, it switches to their user account for auth.

I have 30 Nortel i2004 IP phones and a Nortel BCM400 connected to a
Cisco Catalyst 2950-48 switch. Recently, with no changes made to any of
the hardware, the 2950 switch keeps locking up - all LED's that have
connected hardware show no traffic activity and the LED show's a static

We have about 20 Cisco 2950 switches, but we have just a few that the
switch itself on the management IP will stop responding to pings after
a few days of operation. A power cycle fixes it for a few days.
I'm not sure where to start debugging this. Any ideas?

    I'm looking for feedback from larger enterprise users
    about how well PIX works. My enterprise has 8 POPs and
    50,000 users globally. About 30 firewalls in HA configurations
    with up to DS3 speeds.

Could someone please tell me what is causing this silly problem:
connected through an ISDN router, my mail client can't fetch mails from
my mail server (we have a domain hosted by one of the companies). Oddly
enough, after i try to connect to the mail server through my browser

I'm thinking to rebuild our switches architecture. I would like to
have GIGABIT for server (Cisco Catalyst 2970G-24TS—24 Ethernet
10/100/1000 ports) then 8 CISCO CATALYST 2950G 24 EI. Then using
Module GBIC Cisco WS-G5483 1000Base-T to interconnect all the switches

I've successfully configured a monitoring port on a Catalyst 2950.
It seems like it isn't possible to send back data on that port. Do you
have any idea if there's a trick to circumvent this problem.
tia

hi list,
i need a cable to connect my router 836 to my dsl-splitter.
there are two different cables RJ11 <-> RJ45 offered on ebay. crossed and
straight. may someone plz tell me what type i need?

Thanks for taking the time to read my request for a little help. We
currently have a site-to-site vpn tunnel connected from the
branch-office to another pix at the main-office. The pix in the
main-office have another site-to-site tunnel to a vpn 3000 concentrator.

I would like to take com Cisco certification's. But dont know where i
should start. What would you recommend as the first certification from
Cisco? and maybe advise on a few more ranking from basic(first
certification)->intermediate->advanced. Hoping to get some good reply's

Hi gang - here's a problem that I have open with the TAC, but if anyone here
can help I'm interested in your opinion and experience.
The situation:  VPN concentrator and PIX in parallel, both with public IP
addresses on the outside, and "private" addresses on the inside.  Both on

I have a PIX running 6.3.1 and I am trying make a connection using the Cisco
VPN Client 4.6.01 form behind my PIX to a VPN Concentrator out on the
internet.
I can't get the pix to even try and login to Concentrator.  It just sits