I have cisco 1601 router. this router has 10Base T RJ45 connection. I
understand that this connection is to connect the router with for
example a switch which in its turn will connect 4 computers for
example. Now Where should I connect the internet connection.. the one

I am setting up a site-to-site VPN between 2 PIX 515 both running 6.3(1).
The main PIX I am connecting to already has a couple of site-to-site links
working fine, but when I try to configure this one I get the error message
IPSEC(sa_initiate): ACL = deny; no sa created when I do a ...

I would like to monitor connected VPN IPsec clients on PIX515E with some
GUI. Is it possible with PDM or CiscoWorks or CiscoWorks VMS?
tnx

I saw these guys at networld interop and their demo was very
impressive. Evidentally they have a way to clear up static on existing
netorks without changing out routers. Has anybody else heard of them
or tried this product?

I were given a RFP for networking design in which they request a backbone
switch and one of its spec must support VLAN, CoS and CIR.
(1) I know a bit of CoS, but I'm not familiar with this function in relation
to backbone switch. Would you please tell me how CoS is applied to ...

I have 2 internet connections,(to two different
providers).  
One a dsl connection.
One a T1 connection.

Is there a List of Cisco compatible or incompatible Telnet Apps? The
only Telnet App. that I can use is Putty.

What does one need to do to assign a static IP address to a user when
they dial into an AS5800?
Only for this one user.
~ Matt

Can anybody show me how to enable SSH on Cisco 7200 router with IOS
12.1? Can I create user_ID with possword on this IOS? If yes, please
show me the command. Thanks.

I can't seem to find a command or a command parameter (possibly to 'static')
that will allow me to delete a static route entry on my PIX 501.
I can accomplish it easily though the Java applet, but I don't always have
access to that (I usually shell in).

What would cause the Ethernet line protocol to drop from a switch port for
a short period of time (around 2s); users at the end of this link are
experiencing problems in certain applications when the line protocol drops.
The port is directly connected to a 100Mbps Pandatel media ...

Has anyone succesfully deployed Cisco 1200 AP's using 802.1Q tagging
(VLAN's) with 3COM Superstack 2 3300 switches? I want to deploy some
1200's on a network infrastructure that is comprised of 3300's
(various models) and want to utilise multiple VLAN's on the AP's,

We have a couple of spare 2501s we're going to sell off to free up some
space, but one is a Cisco Pro.
Is there anything I should warn potential buyers about with respect to IOS
compatibility, availability of support, etc.?

I'm currently running a Cisco 2500 IOS 11.2(12) with one of the serial
ports through an IDNX.  I have four spare 2611's with WIC-2T cards
have been trying to get one of them up using IOS 12.3(6a).  No
problems loading the IOS and configuring the serial port.  Local

I have a 2521 router. It has the following ports serial 0, 1, 2(sa),
3(sa), tokenring, utp, bri0, console and aux. How or what can I
configure so it can be accessed from my home network. I'm not sure
what to give an ip address to... or can I???