Do any of the BIOS upgrades work?  I wanted to put new 200 gig
hard drive in my system, so I upgraded the BIOS to b6.  Windows
XP became very unstable, constantly crashing or locking up.
I tried b7 also and the same thing.  What is wrong with these

Dear Soyo enthusiast;
I have a Soyo SY-KT600 DRAGON Plus V2.0.
One of the bios screens is great for watching the voltages, fan speeds,
and temperatures,

I can't load Windows XP on a system with a new KT-600 Dragon Plus Ver
2.0 unless I turn off APIC in Bios. If I leave the APIC enabled XP
installation freezes at the screen that says starting windows setup?
What is wrong? I have a 500 watt PS Kingston PC 3200  512 megx2 Ram and

The generic version of my question is, 'can I use a dual channel
processor (800 MHz FSB) on a non-dual channel motherboard'?
My specifics are:
I already have two computers (Shuttle SB75S) using a socket 478 Intel

I put together a bare bones with this board a 1600 athlon xp 1024 of
133 ram and a g force 440 64 meg video card, flashed the bios to the
latest version that soyo has on their site, worked great until I tried
to run a game then it locked up and I can get into windows running 2000

i have soyo 7vca-e mobo, pentium 3 1.13Ghz, kingston 133 512mb ecc ram,
nvidia geforce4 mx440 128mb video. wont boot no beeps nothing
conflicting info in manual about what cpus it supports. sent email to
soyo tech, no reply. tried the holding insert key while booting, no

I miss a bios capable of using a harddisk of 200 Gbyte size.
The latest bios seems to aa2 from October 2001.
http://www.soyo.com.tw/downloads/selectresults.php?language=&col1=Proc_Intel+PII
I,+PII,+Tualatin&col2=9&col3=BIOS+Upgrade
I need a bios supporting 48 bits HDD, just as this ...

According to the Soyo Website, the SY-KT600 Dragon Ultra Platinum Edition
has Compatibility Issues with these video cards:
- NVidia GE-Force FX Series
- ATI Radeon Series

I have just built my system with this board, specs are:
MB above, P4 2.4C/400/256, 512 DDR400 which runs at 266mhz, 40gb maxtor
hd. I have updated all drivers, service packs (WinXP home) my only
problem is I have no sound, device manager shows no errors, event

Soyo KT600 Dragon Plus v2.0
CPU AMD|2700 /333 ATHLON XP
Corsair Value Select Dual Channel Kit 184 Pin 1G(512MBx2) DDR PC-3200
RADEON 9250 SE 128MB DDR 8x AGP Video Card (powerspec certified 1.5v )

I recently put my computer together. Everything works fine except the
lan connection.  There are no extra cards in the mobo besides the XFX
FF5500 video card.  My cable connection works fine when I use it on my
laptop but when i plug it into my Dragon it says little to no

If anyone can help me on this I would greatly appreciate it.  Soyo tech
support has always been spotty in my experience.  I built this computer
from a bare bones setup I purchased from soyo.  It was a case, 350w
power supply and a P4VTP board.  I added a 512 stick of PC3200, and a

I have a SY-kt600 Dragon Plus  with a Athlon Xp 2200 on it. Recently I
can not get my cd-rw or Dvd to work. It comes back as inaccessible. If
I leave the disk in either drive and reboot it will work until I remove
it again. I have 784 MB of Pc2700 memory and have change it along ...

Hi,
which is the main difference between "Normal" and "Turbo" mode in the
BIOS settings?
Since I exchanged my 256 MB DDR-RAM from Crucial with 2x 512 MB

The SY-P4i865PE Plus Dragon2 v1.0 has mobo connectors for an additional 4
USB ports. I have a case that has 2 front USB ports but I can't get these to
work.
The cable to the case ports can only be plugged into the mobo connectors in