This is my first experience with Soyo. I just purchased the Soyo
SY-KT600 Plus Version 1.0 and I'm looking for any suggestions on DDR.
I'm most likely going with a 512mb stick of PC3200. Are there any
compatibility issues with certain brands or can I simply buy the

Hi, I've used this Dragon+ system over two years now.  It works fine in
general, but it often hungs up.  I know that the system hungs up only if I
run Windows XP pro but not Win2K pro.  this problem happens w/o any
addtitional peripherals, and I've had this problem since I installed ...

I have dragon+ system w/ Win XP pro.  It works fine in general, but I can't
use resume and sleep mode.  If I use either mode, the system hungs up.  Do
you know how to fix the probelm?  I will appriciate any opinons and
suggestions.

Bought a brand new set of components.  Display is showin up as blocky
lines on boot up.  Used a different video board to install a base
win2k OS and flash the bios.  I verified that the Radeon works on one
of my older machines so it's not the vid board.  Flashing the BIOS was

   Would anyone happen to know if there is a compatibility issue with these
two?
   Soyo support has not been very helpful.  I'm trying to install a 32M
Pine PCI video card (XP-PCI3800) in the Soyo motherboard.  After numerous

I've got a KT400 with a Athlon 2500 Barton core 2 sticks 512 mem. and
2 WD 80gb hardrives setup as M/S. My bios version is K7VX4-2AA6 I've
been trying to setup a 160gb HD  using the raid socket as IDE3.problem
is everytime I do I get to right before the welcome screen on XP then

I just received my new KT600 board, filled it with CPU, memory, and video,
turned it on, only to have it shut down automatically within two seconds.
Taking the video card out (MSI G4Ti4800) allowed the system to remain
powered on until I switched it off.  Oddly enough, the same card ...

Anyone find any reviews or know anyone that has tried one? That is the new
SY KT880 Dragon 2 motherboard on Soyo's site?
Frank Howell

I am trying to flash the bios on 875P Dragon2 Platinum Edition from
4aa1 to 4aa2 but I keep on getting the error The program file's part
number does not match with your system.
I've used the following syntax:

Mwave.com has the Micro soyo K7VME mb for $8.11 after rebate (up to $50).
Has anyone here any experience with this model? I ordered one for a emachine
upgrade. It supports XP-BARTON.
1 AGP w/ onboard video,audio & lan + USB 2.0

Help please!!
When I turn my system on, the cpu fan and power supply fan spins briefly
then stops.  I have replaced the power supply already.  Any suggestions, all
are welcomed.  I have a video card, cpu/fan, memory, and harddrives

Help needed!!
I just replaced my motherboard, cpu, and memory.  I now can boot, the system
keeps rebooting.  Is there a way to install drives  for new motherboard?  I
believe the system is trying to boot using drivers from old motherboard.

I know this is an older board, but I am considering buying it for playing
older Dos games for myself and kids. I like an ISA slot. I did a search in
google on this Newgroup for messages about this board, but they were posted
a long time ago. Has anyone here had good/bad experiences ...

I just upgraded from a KT333 and I find that the graphics in games like
everquest is really screwy now. Heads without hair... Menus flickering at
angles. The card worked perfectly with the KT333 Dragon Platinum. Is it
possible I should change the BIOS settings or made lower the AGP ...

Is 2600+ fastest AMD for 133 (266) fsb? my local reseller tells me it's
2400+...
For Dragon + kt266. I wanted to install Barton 3000, but Andy told that
multipliers are locked now, so, only option is highest 133 fsb CPU...