As some of you who read this board know, I have used a first
generation VTA-Pro for some time successfully.  Recently I have had a
problem develop with video.  On a sporadic basis (1 to 3 times in a
heavy use(not gaming) during an 18 hour day) the computer appears to

This is on a PC (Soyo) with ME on it. When you start it you get the
window
to go into Safe monde, only you can't select anything.  I tried
starting

I have a twin 60 megs set of 2 drives making a 120 meg stripping RAID
0 setup. I will be adding two more disks to this array .. same
identical disks.. I would like ot add them and change the RAID to 0/1
setup.. I have read thru the manual but seems a little fague.. any

I have an MSI6195 MOBO and i cant get it to accept a 120gig HD.
Does it require a bios upgrade or will this mobo never do this.
cheers
Jim

   I need some advice on a problem.  I just purchase 2 sticks of 512 mg
PC2100 DDR for my Soyo Dragon Plus (SY-K7V).  It runs just fine with one
stick of 256mg memory and it seems stable with both sticks of 512mg memory
but the bios only recognizes 512mb.

I've got a new kt600 dragon plus and according to the manual, it's able to
boot from usb devices (floppy cd hdd). However, there are no usb devices
listed in the boot device priority menus-- first, second or third. I flashed
the

I have a Soyo SY-5EHM Super 7 v2.0 mainboard, in my 'puter on which I
just reloaded W2000 Pro. I'm having a bear of a time getting my USB
connected HP Officejet v40 up and working, and I believe the problem may
be I have no USB drivers installed. (One might think HP's install CD

Dear Collective,
I have a P4 system running on a SOYO P4I875P DRAGON 2 (Platinum Edition)
using a single Maxtor 200GB SATA drive and WinXP-Pro..
I was wondering, if I were to add a second Maxtor drive of the same type and

I have a Dragon+ at work that I just installed Fedora 1 on. It crashes
a lot under heavy disk or network activity.
I have a Dragon at home that I want to put Fedora on.
I'm wondering if anyone has had any luck with recent Linux

just wanted to let everybody hier know what my experience with this
soyo board was. Maybe I should say "is" cause I still have it.
First the components:
Antec P160 case

i am purchasing an 875 drag2 , i have dragon p4x400 plat. I ahve been
researching corsair memory.Soyo lists the twinx1024-3200LLpro as
compatble. but is the twinx1024-3200C2PRO compatable. I am a lan gamer
as well as 3d artist and need extreame speed. Any answers, ideas and

Dear Collective,
I have a P41875 Dragon II and ATI Radion 9000 AIW running WinXP Pro.  Worked
fine since original assembly and then I decided to do something real stupid
and looked to see if there were any updates to the ATI 9000 AIW device

Friends,
I too agree that the soyo's product is very horrible.
I bought a mother board on line with mother board and cpu comobo.
After assembling and installing every thing, two of mother board

Just ordered and received a K7VEM-Pro motherboard and case from Tiger Direct.
They advertised a $20 rebate. I noticed when filling out the rebate form the
barcode on the box listed a different model number from what was on the
enclosed rebate form. Would this be a ploy by Soyo to ...

I have had a Soyo Dragon Plus! for a couple of years.  Still runs
great!  I just bought a Nvidia FX5700 Ultra card and would like
to know if the AGP Pro slot on this board will support a card that
runs at 1.5 volts as opposed to 3.3 volts.  I can't find anyplace the