I am unable to boot a new ASRock K7VM3 motherboard that I am installing in
an
e-machines H2482 computer case.
I am using an Athlon XP 2400 CPU and 512-meg of DDR RAM, which both were

The SS51G v2 has 3 fan connections:  E1 System, E2 Chipset, E3 CPU.
Question:  Does the ICE connector go to E1 or E3?

I have an FX41 main board that goes through bios batteries at the rate
of 1 per month. I assume the easiest way out of this is to replace the
board. But where do I get one from?...in the UK.
thanks,

I press the On button and can take from 5 to 30 seconds before it
decides to start powering up. Anyone know why this is?
Mal

Anyone else having trouble with the integrated card reader in the SB81P? I see the thing is physically present, but Windows does not see it at all, not even as unknown device. It's like the reader is
not plugged in... But it IS plugged in...   :-/
Regards,
    Evert

what luck, if any, has anybody had with the customer support on the Shuttle
site. They seem to take forever to answer e-mails (if at all!!!!)
Thanks in advance
Andy

I have had a Shuttle Zen for nearly 12 months. It has a 3.0 GHz
Prescott and 1 GB of TwinMos PC3200 RAM, and it has been working fine,
except for some small problems:
1. Left plugged in all the time, it regularly finds the wrong FSB after

Can anyone tell me how to disable the onboard video so that I can upgrade to
a AGP card?
Thanks in advance
Andy

On powering on the system just alternately flashed the dvd and hd light
for
about 1 sec at a time and would do nothing else
any suggestions thanks

Im buying a SN25P and just need a graphics card to have everything i need,
but im concerned about which card to buy.  Am i limited by the size of the
case as to what card i can fit?  Anyone recommend a decent card for gaming
(only have approx. £200 to 250 left)?