Just built my first shuttle ST20G,everything working fine.
One small problem? Lan port on rear has small light which flashes all the
time, is this normal?wood appreciate your advice
djb

Anyone know if the SS51G V2 will handle the power rqmts of the Radeon 9800?
I was thinking of swapping our a Geforce 5600 Ultra with the Radeon 9800
from my desktop.  Will this be a much faster rig?  I typically only run my
LCD at 1024x768x32 for games like BF 1942, Halo demo, Call ...

I've an SK83G with an FX83 motherboard that intermittently shuts down with a red LED
illuminated. The led is close to the front end of the memory slots and is not
documented in the manual.
Does anybody know the function of this LED or any other clues ?

I built an SB81P but the boot drive is F. How can I install so that the
boot drive will be C? Thanks.

I have a Shuttle system, with RAID controller on motherboard.
Hard Disk is installed on the RAID controller to free up IDE channel for
DVD unit and better performance.
I've got a card reader instead of a floppy, so on original install i had

I'm thinking of upgrading the CPU in my SN45G.  Can the shim on the
CPU be taken off or do I need to buy a new one?  If so, where in the
UK can I get one?  I've had a look about at places that sell Shuttles
and accessories but can't find any.

As listed on http://www.meulie.net/forum_viewtopic.php?85.1879 , Shuttle has released new (june 9th, 2005) drivers for the SB81P. This seems to be a Intel-zip, instead of a Realtek-zip. Is this change
in manufacturer a reason to upgrade?
Regards,
    Evert

I recently got a USB keyboard but it dosn't seem to work with my
AN35(n) Ultra motherboard. I think i may need to update my Bios but i
have never done it before and don't know how can somone please help me
out

  I  just got a new ZBoard from Ideazon but i cant get it to work with
my system.
I think I need to upgrade my BIOS but I have never done it before and
don't know how .

I rebuilt an exising system around a SN45G V3 a few weeks ago.  I had
to replace the memory I originally had for it as I couldn't even get
Windows to install with it.  I ended up buying a Crucial 512Mb PC3200
DIMM.  Everything was fine but until I decided to get another

II am putting a system together - using the AN35(N) ultra with an AMD
3000/333 Athlon  XP  processor.   I have  a 512mb & a 256mb pc 2700
memory modules.  Would I be gaining much if I bought 3200 memory to
use in that MB/proc combo instead, or would it be a waste of money?