I read the following quote from
http://www.digit-life.com/articles2/nforce2-1vs2channels/?98399
It's also possible to use three modules, but remember that the dual-channel
access can be set only for the memory size equal to the double size of the

I've recently installed an AN35N Ultra on my computer and I can not
get the on board LAN and sound card to install.  I've tried disabling,
rebooting and re-enabling in BIOS.   I've also down loaded the latest
drives and reinstalling but so far no joy.  They show up in the device

I'm thinking of getting Shuttle's ST61G4 model as a desktop computer.
I've built full-sized computers before (in pre-DDRAM, pre-SATA times...)
so I'm not too sure as to what problems might occurr.
1. Does the package contain thermal paste or is that stuff no longer

i noticed that on my new SN41G2 the hard drive lamp si constantly flashing
(once per second)
first i thought that it was the OS constantly accessing the drive (WinXP
SP1), and indeed it is not flashing when in BIOS, onlyu when XP is loaded

I shortened the bracket on the card reader and then inserted a second hard
disk behind the card reader.  The system board went from 54 to 58 degrees
but the CPU remains at 38 degrees.  I don't understand why they didn't put
more thought into the design in the first place.  They had ...

I have a Shuttle "Zen" ST62K and want to get the Wake On LAN working.  When
I turn it off, the port on my switch still glows - it's "on."  Yet the NIC's
LED on the back of the PC isn't glowing, and nor is the IP address pingable.
What exactly do I need to do in order for the PC to ...

Any ideas why all of my drives show up as SCSI in XP pro and AN35N Ultra? I
have a cd and dvd burner and a 200 GB hdd  hooked up to the 2 IDE
connections on my motherboard. Device manage in XP shows them as scsi and
nothing under IDE ATA/ Atapi controllers except the nforce ide ...

hi,
i'm looking at getting a new shuttle, comparing the st61g4 and the
sb61g2. i checked out shuttles own compare page but i wanted to get
some feedback from the experts online.

I was running my Barton (T'Bred core) 2500 at FSB220x10 and using 1.725v to
obtain Prime95 stability. Temps would go up to 50C socket using 2 80mm
exhaust fans and a Vantec Aeroflow in an Antec SX835II case. For memory I
was running 2x512MB Kingston HyperX in dual channel (slot one ...

Need some feedback on OCing a Barton 2500+ (pre-week 39) on the Shuttle
SN45G.
Using the I.C.E. cooler the cpu temp sits at 53c running Prime95 for the
last hour with the case temp running 39c.

Trying to install upgrade to XP but I get the message:
"IA Bus Master IDE Driver
=========================
The currently installed driver for this device is not compatible with this

I am newbie. Just built a system with
ak32vn
athlon xp 2400
centon 512M pc2700

Does anyone happen to know the PCI version compliance on an AK12A v3.0?
The documentation doesn't say and the website doesn't seem to have it
listed.
Thanks.

I bought a SS51G soon after it came out 20 months ago or so, using it as an
audio server.   It works great, and I would buy another Shuttle XPC in a
nano-second, but I wish it were a little quieter given its right in the
living room.      Does anyone know if the newer models, such ...

I know if we go down this route you could end up with 4 and blow the hole
idea
of a shuttle out of the water
but 2 is a reasonable no. - are there any plans for this ?