I have just built another machine for my daughter. Shuttle AK38N ( Via
KT333 ), Ahtlon 2200+, Aries 256DDR 2700, Leadtek 32MB Ge Force 2MX
AGP x 4.
I had Win XP Pro with SP1 installed on hard drive on old system. After

Hello everybody! I have set up little linux server baser on the old AT
Shuttle HOT-555 mainboard. I want to connect ADSL modem to this server -
unfortunately, the USB connector was missing. I have bought the
connector, but the problem is I don't know which pin on this connector

I recently bought 2 AN35N Ultra boards. When they post and I attempt to
enter the bios setup by pressing the delete key, nothing happens for 20-30
seconds and then it enters the bios setup. Also, it has the same delay when
it attempts to identify the ide drives. It also erratically ...

I have an SN45G and Hercules AIW 9800 SE.   Initially, the system
booted no problems.   However, in order to get it to boot now, I have
to disconnect the power cable from the AGP card, power on the PC and
then plug it back in. Otherwise, no boot.

I have AK12 motherboard and 650Mhz Duron processor. I've got old release of
bios (s014) and my duron worked @ 712Mhz. After I've updated bios there is
strange thing: computer is booting up for maybe 2-3 seconds and turns off.
My cooler is plugged into correct fan plug (CPU FAN ...

I just got one of these and installed RedHat 9 (Shrike).
I have a few issues:
1) cannot get the drive to use DMA:
[root@shuttle Sound]# hdparm -d /dev/hda

I just installed the new Shuttle 250 watt power supply in a SB75g2
that originally sounded like a turbojet. My power supply runs cooler
now, the fan runs faster under same conditions, and the sound is a
little less. I don't think those of us who want silence will think it

I think the BB is too noisy! Which Fan did you guys use to make it more
quiet???
Sasa

shuttle newbie - getting a used SK41G Athlon Shuttle XPC off ebay,
this is an athlon 2400 w/ 1Gb ram, 80 Gb hd, DVD+-RW,
both slots open (agp/pci), onboard 'prosavage8' video,
(whatever that is), - question is - what do i need to make

I have been wrestling with my Shuttle N45G and a Radeon card.
I have at last managed to get TV working by pretending I am on
Norfolk Island (very exotic) instead of in the Netherlands...
But now I find I have no sound. I suspected at first a

Hi Group,
I am wondering if other people have experienced the following before I
contact Shuttle on the matter.
I have two SN41G2 Shuttle XPCs both with the CA-10 SP-DIF card fitted.

i have a really strange and annoying problem with a newly set up pc using
mentioned mobo.
no matter how many times i reinstall the display drivers, somethings always
screwy with available resolutions and color depth.

I bought a new AB60PN to replace my AV49/Duron 1.4 that had problems.  That
was my first Shuttle board in around 30 that had any trouble.  I bought a
1.7gig Celeon and installed a good 256 DDR2100(checked with memtest86)
stick.  I have been building PCs as a hobby for 14 years.  I ...

One of my old students dropped this unit off to me to check out as it won't
boot. I have tried everything I know to do. Tried a new ATX PS, different
RAM, even bought a cheap PCI Vid Card. It appears to boot, HD spin up, LED
on MB llights up. No Vid out. Reset Bios, replaced battery ...

I need to replace my power supply.  I can obtain the original Channel
Well CWT-150FATX ("blue label") from several sources including Shuttle,
however I was wonder if the PP-150FATX from AMS which is the PS for
their gBox (same FV24 MB) or the ACHME (red label) from Shuttle will