shuttle s/n N41G00321D05672 SYS ID N4102201GA3THOS
shuttle boots ok, windows xp first screen appears, goes blank and
thats it, screen them display same message as if vdu cable
disconnected.

I have a bios fn41s022.bin to install; how do I get the thing
installed, is it the usual way with a bios flasher, and if so, which
one, where can I get one from?

I'm setting up a shuttle and can't get windows (98SE) to move, paste
or delete any large/multiple files! Explorer crashes, IPF in module
<unknown>
Also processor-intensive apps crawl, video won't render properly, the

I've just bought 6.1 speakers for my 6 month old SN41G2 but I have
found that there is no output from the C/B (top) jack socket. I have
set up win XP for 5.1 output  and the sound from other two outputs is
OK. Any ideas please?

I bought the SB61G2 lately and I want to update my BIOS. On the mobo I
see FB61/v2.1 .
In the Shuttle site I see that SB61G2 BIOS says v1.x , and FB61 v2.x
BIOS are reffered to ReflexionPC. Which one should I use ?

I have a SB51G.
I have the 6-in-1 card reader.
And I just bought the wireless network adapter.
They both use internal USB connectors.

I cant get my new SN45G XPC to use IEEE under Win XP Pro - SP1. The
device is recognised by the WinXP hardware wizard but the load then
fails, claimimg the relevant section is missing from the INF. It all
works fine in Mandrake though, so it's not hardware. I've searched

Where can I get a silent power supply for
SN56G? The default one is too loud for me.
I already tried to replace the fan, but
that didn't quite work since the fan doesn't

Anyone got this combo to work? Is size or heat a problem? I have a 9500pro
running great now, but am looking to upgrade.

Just got one of these, and it seems to work fine. Not really tested it with
anything serious yet, but one thing is bugging me that maybe shouldn't be.
Is there any way you can increase the amount of shared memory allocated to
the integrated graphics.

I just got my new sn41g2 from newegg, and I put my athlon xp1800 and
crucial ddr ecc 2100 ram in it, and the machine wont post!
I've reset the cmos, and even done the wierd power on with insert key
down thing with no luck.

Just upgraded to the latest BIOS on my machine and can't get my Athlon 1700+
recognised as anything other than a 1700+. Previously was running as a 2400+
IIRC. I can't remember my previous settings but the max I can get the new
BIOS up to is 166/166/33. Am I missing something ...

Quick question.  I have 2 X 256 DDR dimm's in slots 1 and 3 on this board.
I realize the performance gain is not much with dual channel but is there
any way to tell if its running in dual channel mode short of benchmarking?

Other than the AN35N400 having 6 channel audio, rather than 5.1 channel
audio, are there any other differences between the 2 boards?
I'm planning on buying one of the editions of the AN35 within the next week
or so.  Newegg has the 35N Ultra for $56.99 and the 35N400 for $57.  Any

<repost>
hi, does anyone know if the sb65g2 has an internal usb port?
thanks
tim