Can you use the Suttle wirless module with this machine?

I've just replaced the 80mm heatsink fan with a quieter Papst fan but this
thing still sounds awful.  I don't fancy pulling the power supply apart to
replace the fan in there (which I gather from other posts is the problem),
is there another power supply that I can buy to replace ...

Wonder if you can help, my shuttle system has been running for about 8
months no problems.
This morning turn it on , no sound.....
Check with headphones and no sound out of any ports, taken cover off all

I'm just wondering which version of Award Winflash is the best and
most up to date to flash Shuttle motherboards under Windows.
I have an FN41 motherboard (the one inside the SN41G2 SFF) and the
only Winflash version available from Shuttle seems to be 1.0.0.1 (from

I bought and built this machine up over the week-end and all it running
pretty well.
I installed a 2.6Ghz P4 and wanted to use 2 sticks of Kingston HyperX
KHX3200/512.

Any out there, who did already a BIOS update for the Shuttle FB61 G2? If yes
was it successful, or did you see any problems?
I'm asking because I had problens with the new 38th version... (on two
Shuttles)

Somebody know if corsair VS256MB400 256MB DDR 400Mhz ram works OK with
SN41G2 (im using IGP).
Thanks

Hi, I have a Shuttle AK21A V2.1 with an AMD Duron 1300, 256Mb PC 2100, AGP
4X Card, Award BIOS.
After it was lent to a friend it now will not boot and I see nothing on the
screen!

I just got a Shuttle SK41G and upgraded to Bios FX41S025. Whenever I
plug in the HD (Western Digital WD800JB 80GB) everything seems to move
in slooooow motion. Bootup, Bios, everything becomes sluggish. Is it
possible that there is some incompatibility with the specific model or

I have been running a sv24 system for a few years now and it recently started
giving me video problems with the on-board S3 Savage chipset.  The system will
boot fine but after a few minutes the video will freeze and give random patterns
(some made up of mosaic content from last ...

Turn $6 into $60,000 in a matter of days, legally, do it now!!!
"Postal lottery": Turn $6 into $60,000 in 90 days, GUARANTEED
I found this in a news group and decided to try it. A little while back,
I was browsing through news groups, just like you are now and came

I've got the SN41G2 running 2 - 512MB DDR2700 RAM modules,
XP2500+(Barton). The BIOS is the last rev (required for the XP2500+).
Once the BIOS was updated, the unit has been very solid and reasonably
fast. I'm using the motherboard video. I do have some questions that

I have the SN41G2...it has two Front USB ports. When i plug in devices in
the other one, like usb drives, irda etc..it works fine.  But the other
port, i plug those same devices and i get the 'USB device not recognized'
error. What's wrong here?? Is the USB port bad?? I was thinking ...

I seem to be getting all the problems no one knows anything about,
apparently...my SK41G system constantly freezes within the first 15-20
minutes after startup. The exact time is variable but it's never too
long before it freezes instantly and completely. The CPU is an XP2400+

Can someone tell me what the proper timings should be for the following
Config:
SN41G2
2 x 512 Kingston PC 2700 CL 2.5