I want to use the gameport on my sound card.
How do you disable the on board game card?
My BIOS does not have an OnChip Game card: Disable or Enable
All I have is Onboard SuperIO Device > Game Port Address: Disabled, 201 or

Still having severe problems, managed to Flash Bios ok, but still keepe
rebooting decided to re-install xp, but a blue screen comes up it says that
a thread tried to release a resource it did not own, any idea what it means,
goes on to talk about incorrect install of ...

What is the use of the SPDIF on the front of my SN41G2?
Computerzeek

Recently added a 40GB Quantum Fireball to my 40GB Seagate drive in my
shuttle SS40G running w2k. Boot drive is on Primary master with a DVD-RW on
2ndary master. Added the drive fine to primary slave and it's detected in
BIOS and windows correctly. However boot up is slow and my DV ...

I have an Interlink Versapoint RF keyboard/integrated mouse. The
transmission is great and it works. Three things though:
1. The mouse pointer is sloooow, too slow for me at least, even when
set to FAST in the Windows control panel.

Would anyone know why my SB61G would stop working properly with USB2.0??
both on the inboard pins with a PC12 card reader, and on the built port
front and back with a sandisk USB2.0 card reader
Also the combo card -- DuoConnect for adaptec -- firewire and USB2.0 -- will

I have a SK41G, it has worked fine uptill couple of days ago then a blue
screen kept coming up on trying to boot telling me that bios needs to be
updated.
Have been on Shuttle home page but have tried to make sense of there

i have a av32 and it just stops boot at the verifying dmi pool
data.....update success and stops there
hardware
1g intel

New bios for sn41g2 is out :)
http://www.shuttle.com/hq/support/download/dwn2.asp?model=SN41G2#

I've had two SN41G2 XPCs (One died on me), and both have had TERRIBLE
quality from the S-Video output on the board. Since I bought the unit
to run on my TV, i'd really like to have this work properly. It almost
seems to me that the voltage output is at the wrong setting by default

I thought I'd post my experience here, hopefully it will help someone.
After 3 days of fighting with a very unstable system (random reboots,
unstable graphics, you name it!) I decided to take it apart and start
from scratch:

Is using a separate video card the only way? What about using the
S-Video straight in to my S-Video input (bypassing the RCA
conversion)? I am using a HD television and I could use a better
picture out of the Shuttle ...

Microsoft Partner
this is the latest version of security update, the
"September 2003, Cumulative Patch" update which eliminates
all known security vulnerabilities affecting

I just put together the SB61G2 and plugged in the power...LEDs on the
board turns on (red & green) but the power button dont work. The front
panel is plugged into jp13 which is right next to the SATA. I have no
idea what is wrong..HELP! Thanks

this is the second time i have this problem, first time it
was send back and a replacement was received under
waranty. However now the waranty is unfortunatly over :-(
First: Nothing is changed in the system. This just happened