On My P6N motherboard the Firewire board does not show up in the
device list even though it is on in the BIOS.  I have actually tried
it both ways.  
All devices say they are working, there are no device unknowns or

I have a K8N Neo2 Platinum with Athlon 3500+ and 1gb OZC Gold memory.
I want to know (relatively speaking) if the following upgrades make
sense:
Keep the mobo and change the cpu to an FX-55 and change the ram to 2gb

Just built a computer using the Neo2-Digital board (nice board!)
Fresh format and install in Windows XP w/SP2.  Then installed MSI
drivers and utilities.  Everything fine.
Then applied about 100 Windows security updates since SP2.

I have a P35 Neo2 and various utilities show there are two temp
sensors on board.
Does anyone know where these are on the board, and what they are
reporting?

Before trying to quiet an older pc I tried adding some memory. It had
a pair of 256Mb chips in slots 1 and 2 and I added a 1Gb chip to slot
three. Turn it on and nothing. Removed the 1Gb chip and nothing. Power
supply fires up and fans run but motherboard diagnostic leds are green

I recently installed a USB 2.0 front bay hub and connected it to a USB 2.0
pin header on the mother board (MSI KT3 Ultra2).  When I plug a High-Speed
USB 2.0 flash drive into one of the connectors on the front bay hub, a
notice on the screen suggests that I connect the device to a ...

This worked fine a couple of weeks ago but now I cannot read or write
CDs on this system. I tried 3 different optical drives and WinXP and
Vista in a dual boot system but nothing. I moved the drive from master
to slave but that didn't help. I flashed to the latest bios and set

I plan to upgrade my single core Athlon 3200+ CPU to a double core X2
3600+ on my K8N Neo4. I'd like to keep the same WinXP install. Should I
reset the bios? Will WinXP recognize the new processor on startup or
will I have to do a repair install?