At
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=650
for the k8 neo 2 F
the web page says

Can I just add an extra drive and enable "RAID" in the bios ?
Say I have an ATA drive from which I boot win2K..
Or a SATA drive..
Thanks for your help !

I've currently putting together a K8MM-ILSR based system with an Athlon64
3200+ CPU.  I don't have all the bits yet so its not in a final
configuration but it always hangs when warm rebooting.  Whilst running
Windows it seems pretty rock solid, no crashes or anything.  If I do a

I recently replaced the RAM in my old PC. The computer has a K7T Turbo
LE motherboard (MS-6330). I used to work fine with 1x128Mb PC133 DIMM
and 1x256Mb PC133 DIMM in place. It was cheaper for me to get 3x128MB
PC133 DIMMs this time, so that's what I bought.  The modules ...

When I take out one of the SATA drives, the remaining drive in the
array
continues to boot and work as a single drive.  However, everytime I
boot,

i am getting a problem during the uninstallation(MSI) if the installed
exe file are in use that means this file is locked.it simply ignores
the files rather than print a error message during uninstallation
procedure.it happens only with the exe file of less size.i am not

i have a new Mobo and chip.
MSI  MS7030  AMD 3000+
i tried once to overclock just a tad bit,
and it shutdown!

i installed pc alert 4 and it keeps saying the power is 2.22v and i put
in a new power pack and it still says its 2.22v and i know its wrong
because i took it out of my old computer and it works at 12.5v can
someone tell me why its saying it is 2.22v

I'm working with a computer that has
a MS-6339 motherboard.  I'm assuming
that's the MSI MS-6339 board.  It doesn't
have any documentation or disks with it,

This is the board I'm looking at for an upgrade. I'm hoping a couple of
folks on here might have one and can tell me the good, the bad and the ugly
about this board. Reviews are nice, they all says wonderful things....but
they've said the same about boards I've had that were pure ...

I upgraded to a K8MM-V a few months ago from a Asus A7v. Ever since the
disk access has been slow. I used the MSI Live Update to upgrade to the
newest drivers. I have gone through and optimized Windows XP as many
ways as seems possible. I've updated the Bios. The Bios settings are