I have a K8Neo2 platinum and two SATA 250GB drives pri/sec.  In device
manager I see three nForce3 SATA Controllers only one of which has the
drives active and DMA selected.    I have tried to uninstall the other two
controllers but they keep rappearing after a boot. I'm sure ...

Okay I built this low cost system for a friend and it works great.
Plays games great.  Runs DVD movies great.  It evens burns cds with no
problem.  The one problem i have is starting to turn into a nightmare.
I have updated the firmware of the NEC 3500AG DVD Burner.  I have tried

Hey all, small prob. I have a AthlonXP 3200+ with 1 GIG of (Ultra
pc3200) RAM, an Enermax 350W PS and the latest BIOS.
My problem is that I can setup up the processor to run stable at 400
FSB but the memory will only go to 333Mhz. After that, its crash city.

I have a 875P Nero series MB with 2 SATA and 2 IDE drives connected through
the promise controller. This PC used to boot but after CMOS was accidentally
cleared it won't boot at all.
Whilst installing XPPro I press F6 at the appropriate time to load the SATA

I have an older MS-6167 with Athlon 800 that I'd like to set up to do
video capture if possible. I'm considering upgrading the video card to
a eVGA e-GeForce 4 MX 440 which is a 4x/8x AGP card. The 6167 only
supports 1x/2x AGP. Would I be able to use that card? What about

Dear  all,
I have been given a PC with a 875P Neo series mainboard. With twin 120 Gb
S-ATA drives.
I wish to add another 2 IDE drives all using the Promise controller. Things

I have a KT4 Ultra running an 800 MHz chip that I want to upgrade.  What
is the maximum speed that my board will support?

I installed my new MSI motherboard, with Athlon 3000 ,, love the
speed.,
but i cant boot into my 2000 hard drive ?
I have a XP hard drive that works just fine,

I am having some issues upon booting/rebooting the system. I get a
black
screen (no video) upon boot SOMETIMES...not consistent...same when I
reboot.

I'm about to pick up this motherboard. Can I keep my existing RAM for the
time being, or might there be compatibility issues? Also, is there a better
board recommendation for the 64 x2?
Existing RAM: Corsair VS512MB400 (512x2)

I apologise if this has been asked before but can anyone recommend a 939
socket motherboard that has both pci and agp trying to upgrade a pretty high
spec system the cheapest way taking into account just bought a 7800gs NVIDIA
agp card. System presently has 4x 300gb sata drives ...

This K8N Neo2 Plat MB came with MSI Sound Effect which afaik "takes over"
from soundman.  It has a 3D sound test for 6, 7 or 8 channels including
SP/DIF.    I have this output connected to a home cinema receiver and 5.1
speakers.

I have a K7T266 Pro mainboard.  I want to do a mid-life upgrade.
What is the fastest CPU I can install on this board?
The handbook also lists this as an MS-6380. mainboard.
If any one in the UK sees this post, can you please tell me where I

I have two of these and both have the same problem.
It reboots by himself. It thinks it has something to do with the
integrated network card. Can't find in the bios where to disable it.
Somebody an idee how to disable it on the hardware site ?

I've been handed a PC, MS-6758 875P-Neo  Twin SATA RAID drives and one IDE
drive. This PC has decided not to boot all of a sudden with no changes made
to it. The IDE drive is active only for a few seconds, then nothing else
apart from fans running.