all i get on start up is    first boot screen ok   then all i get is binary code eg:
010101010101010101001100110010101010101100110101010101010101010101010100101011010100110101010101010101010101010101010100101
all over the screen
--------------=  Posted using GrabIt  ...

Here is my system:
* Athlon XP 2000+ cpu (no overclocking)
* MSI K7N2G-ILSR mobo (all mainboard drivers are current)
** 1GB RAM

my mobo is down, may be some bads caps, i've try to remplace them, but it
does not boot up more....
Searching on Ebay, there is a 6330 V5.0 for sale, is it an evolution of the
KT7 Turbo ? ( the KT7 Turbo manuel says it's a MS 6330 ver 3.0 )

[MSI KT3 Ultra2, Athlon XP 2500+ (Barton), 1GB Crucial 2700 RAM, 400w
PSU, Speeze SPA04S4-U WhisperRock V Sk A HSF, Realtek Dynamode 10/100
NIC, Nvidia GeForce FX5200 AGPx4, Maxtor Diamondmax Plus9 ATA130 80
Gig]

I have a KM4M MSI board,  When i got home today the computer was off,
when i try to boot it up, all i heard was BEEP(2-3
Seconds)...3-4seconds...(Beep 2-3 seconds) ETC.. Everything is
spinning HD's Proc Fan.. etc..  plus  i dont have my mainboard book

I have a new build on a new  MSI K8N Neo-V Socket 754 NVIDIA nForce3
250. I have flashed it to the latest BIOS. Semperon 64 3700, Kingtson
DDR400 512MB
It runs fine until I put in a Promise TX2 Ultra 133 controller . This

I got this computer with a MS6191 MB and it would always freeze and
reboot at odd times when i hit the tab key. I tried to fix it by
messing with the BIOS settings and told it to load the BIOS defaults.
This changed the video setting to "NONE". i found it odd, but saved it

I have an old AGP 1.0 MSI MS-6191 mainboard
(<http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=121>),
I'd like to know if an AGP 2.0 graphic card (like the PowerColor 7000
<http://www.powercolor.com/muti/fre/product_Series.asp?int=agp&chp=7000>)

Hi all to all people who got that video card the msi rx800-td 128mb
256bit gddr3 12 pipe pci-e
I would love to know if there is a way to unlock the 4 remainning pipe
that aren't use by that card. I've read that it can be push to 1000mh

On the MSI forums, there seems to be a lot of talk about CMOS
batteries dying very quickly. Has anyone experienced this problem? I
think it's mainly with the K8N Neo4 boards.
Has anyone found a fix? One person reported that disabling the

Hi all, is there any revision number to look for with the msi k8n
neo2-f s939 board???
I'm stuck with my agp card witch cost me alot  and i would love to get
me a 64bits board with the socket 939.

I've got a 945P Neo-F board with a 3.0GHz Pentium D.  When I first put
this together I didn't realize that it was overclocking (I never had a
system that would do this automatically before) and the CPU
temperature would shoot way up and the system would crash.

I have disabled DigiCell from the startup on my computer (945P Neo-F
system board).  I found that almost, but not quite always, when
DigiCell launched on a cold boot the system would lock up.  On a warm
boot it never did.  I disabled it a few days ago and haven't had a

Someone care to explain the difference between above drives please.
Will a PATA drive work in a normal IDE port?
Thank you very much
Bert.

I have an AMD 64 3000+ machine with XP and an MSI K8N Neo4 Platinum bd.
All of a sudden all of my networking quit working. The machine won't
see DSL or my old Win98 machine (both on the same LAN). Nothing was
changed or downloaded prior to this.