Got my KM4M-V mobo a couple of weeks ago, but appeared to have to
install the SATA RAID drivers and Audio drivers off the CD in order to
get SATA support and audio working.  Only trouble is I'm left with the
RAID and Vinyl audio icons in the sytem tray and they appear to add

I know under my old Nforce2 chipset I had seen Nforce Ram Controllers and
the like in Device Manager under System Devices. With the Nforce3 do this
not exist as such?...if anyone has K8N Neo2 could you please check and post.
Am wondering if that is where my issues are hiding.

Had to replace MoBo & new 250Gb HDD.  Tried everything to install XP
(inc tried upgrading win98).  PC gets part way through and without
waring shuts down!... Help please!!!  Even tried F5 ACPI
combinations...thank you!

I am looking for a motherboard that will hold 2 or 4, socket 478, P4-
1.5GHz CPUs.  5 PCs at my office were flooded by Katrina.  They were a
total loss and I have ordered new systems.  But looking at the systems, I
noticed that although the water came up half way on the MB, the ...

Somehow when we evacuated for hurricane Rita,  I saved the conputer,
and most of the software that I had but I lost the startup and
configure cd for the mobo.  Does anybody have this so that they could
send me a copy??

Ok here is the problem i have a k8n neo2 platnium and 2 possible
videocards  that may or may not work with motherboard...first
question is does the Sapphire Radeon 9600 atlantis ati work with the
motherboard....second is does the Geforce Fx5500 work with this

Please, can anybody give me an helping hand?
I have been using an coppermine CPU, Intel PIIIE 866 mhz with an MS-6199va
motherboard for a while. The CPU-support table says it will work okay and it
does too. Though, today I did notice something that makes me wonder. I use 3

just finishing building this with a A64-3700....no matter what I do I can
not get the MCP Lan controller to work. Windows XP shows it as active with
no errors but I can not access the net or my network. I have tried with the
access manager and without. I did not install the ...

I have a 875P Neo motherboard that no longer works. On start-up I get one
beep, then it energizes a floppy drive and then a CD drive and then a
combination CD-DVD drive. Then it gives 4 beeps and recycles into an endless
loop.

I have a AMD Athlon(tm) XP 2000+ whose clock speed is 1.665Ghz. A
program called "Sandra" says that my motherboard will support a faster
CPU.
My mob is a MS-6382 & the manual says "support 600Mhz up to 1.5GHz

On a K8N Neo2 Platinum with 2x512 HyperX 3200 memory I could easily
overclock my A64 3000+ Winchester to constantly run at 2430 MHz (9 x 270, HT
3x).
I recently bought a K8N Diamond SLI, using all previous components except

I would like to put some cooling into this system.
Is there a particular fan I should buy. And, how does one fix these cooling
fans: my case does not provide any apertures on front, although I could use
a spare CD slot. There are multiple holes on side panels, but no fitments to

My self-built K8T Neo FSR ran fine for 18 nonths then started working
intermittently.  One day no problem, next day can't power on, next day
fine again, next day won't power on for several days, then works for
days/weeks at a time. Currently not powering on.

First I'd like to say hello, I'm new to the group, but not new to
computing at all...........
I have an issue with installing more than 1 memory stick on this
board....All sticks are identical as far as speed & manufacturer....and

The Neo 945P mobo wants some kind of 8 pin connector from the PS in addition
to the ATX1 connector AND 4 pin connector! My nice new 400W PS doesn't have
this 8 pin connector, but instead has some square 4 pin connector that
doesn't fit anywhere on the board. I was thinking of ...