I plan on using 2 Seagate 250Gb SATA HDD's on this MB. I have the MB
here but am awaiting the remaining parts,,, HDDs, video card, ram ect.
Try as I might, I can't decipher from the manual if I will be able to
configure these SATA drives as my root drive (C:\). I figure I can

I need  3 or 4 slots for memory and has to be AGP
My old 3200 333, memory needs to be able to work there.
For gaming whats the best?
I was looking into this one

Server functioned fine for several months until yesterday when it auto
shut down.
I rebooted thinking it had a virus - it shut down within seconds.
Unable to get it to POST, i opened it up about 20 mins later and found

My system has a MSI K8T Neo2 motherboard with an AMD 64, 3000+ CPU and PQI
PC3200 Turbo Dual Channel memory (2) 512K sticks.  For some reason the
motherboard will not work correctly in dual channel. The memory timings are
2-2-2-5. I have tried running in dual channel by using ...

Hello all, I recently received a used MSI6163 Slot 1 board from a
friend. It currently has a PII at 400Mhz on it, but after poking
around on the web and in this group, it seems the board supports most
of the coppermine chips.

I Need Help!!  :cry:
I tried to flash my DVD-ROM and it has gone horribly wrong, if i have
my DVD-ROM plugged in then the system freezes at checking NVRAM and i
can’t do anything at all, pressing any key does nothing on the

Now im thinking of maxing out my current mainboard with a new cpu, but two
issues have come up.
1. Will my KT4V support a barton 3200+?
   The latest BIOS says it fixed an issue with the 3200+, but I can't find

I've just completed a new PC build using a 875P NEO-FIS2R. I've
installed my existing ATA100 100gb boot drive with WinXP home on IDE1
connector. I've installed my existing DVD drive on IDE2 connector set
as master and my existing CD drive on IDE2 as slave.

Anyone know if this m/b will support dual core CPUs?
Thanks,
Shane

Has anyone ever had a reply from MSI support?

will SOMEONE PLEASE answer my question...........i got the msi
kt6v-lsr board in...........installed.........booted.........went to
bios and the highest the FSB setting would go is 280?
how to make 400 fsb..................have 1 g mushkin 400 ddr

A friend of mine recently bought Neo2 motherboard and a Winchester
3200 with all the other gubbings required to build his rig.  When he
assembled it and tried to power it up the fan spun for 3 or 4 seconds
then stopped.  We tried reseating the CPU and fan - still the same.  I

Amd athlon driver for 32 bit windows xp.
Use your 64 bit system power with windows xp 32 bit
Worked fine with my k8t neo fsr.
Link :

I have an old 6167 MSI Motherboard, and I have recently upgraded to add
the SiL 3112 SATA Controller PCI Card in order to use a 200GB SATA
Drive.  I have the latest version of the BIOS (1.6) which is built on
Award 6.00.

Ouch...My 865PE Neo-2 has an IDE CD Rom, and an IDE CD/DVD RW drives.
Both are on the secondary IDE channel. Suddely neither are recognized
by Windows XP.
The drives don't show up in Windows Explorer or "My Computer".